Recommendations - DeDietrich AWHP-2 MIT-IN-2 iSystem User Manual

Air / water heat pump
Hide thumbs Also See for AWHP-2 MIT-IN-2 iSystem:
Table of Contents

Advertisement

AWHP-2 MIT-IN-2 iSystem
1.2

Recommendations

10/06/2015 - 7616372-001-05
WARNING
In order to prevent any danger caused by an
unplanned reset of the thermal circuit breaker,
this appliance must not be powered through an
external switch, such as a timer, or be connected
to a circuit which is regularly switched on and off
by the electricity supplier.
WARNING
Depending on the settings of the appliance:
4 The temperature of the radiators may reach
80°C.
4 Do not touch the refrigeration connection
pipes with your bare hands while the
appliance is running. Danger of burns or
frost injury.
CAUTION
Do not neglect to service the appliance. Contact
a qualified professional or take out a
maintenance contract for the annual servicing of
the appliance.
WARNING
Only qualified professionals are authorised to
work on the appliance and the installation.
4 Regularly check that the water pressure in the
installation is between 1,5 and 2 bar.
4 Ensure that the appliance is accessible at all times for
maintenance purposes.
4 Avoid draining the installation.
4 Use only original spare parts.
4 Never remove or cover labels and rating plates affixed
to the appliance. Labels and rating plates must be
legible throughout the entire lifetime of the appliance.
1. Safety instructions
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents