Web Access - Wansview Q3S User Manual

HD IP Camera Q3(720P)/Q3S(1080P)

5. Web Access

To view your camera in a web browser, you'll need the camera's IP address and camera's port.
If your computer is in the same network, just type the address in browser address bar:
http://ip:port, for example http://192.168.10.128:80. User can get these data from router or from
wansview app > Advanced Setting> About Camera
If your computer is located outside the network where the camera is installed, user needs to use
camera's wan IP address, and need to manually input the camera's lan ip address in the Port
Forwarding Section (Please consult your router user guide or search online) to view the camera.
The login mask will appear:
Then there are two view modes, we recommend using View Video Mode 2 (Flash Mode), because
Mode 1 need to install OCX Plugin (HYPlayer.exe), and most of the browsers do not support OCX
plugin now.
48