Detail Programming - Speck pumps BADU ECOM2/S90 Installation, Operating And Service Manual

M017837080000 REV. January 19, 2011
How to Program Detail
Factory Settings
Timer is preset with the following factory default settings.
Monday thru Friday Low Speed Setting
Time On: 7:00 A.M.
Time Off: 2:00 P.M.
Monday thru Friday High Speed Setting
Time On: 8:00 P.M.
Time Off: 12:00 A.M.
Saturday-Sunday Low Speed Setting
Time On: 8:00 A.M.
Time Off: 4:00 P.M.
Saturday-Sunday High Speed Setting
Time On: 8:00 P.M.
Time Off: 12:00 A.M.
restore Factory Defaults
The preset factory settings above can be restored at any
time. To change the program settings back to their factory
default settings:
1. While in STOP mode, press the enter button for
5 seconds Verify Press ENTER to confirm appears
in the display.
2. Press ENTER again if you want to return to factory
settings. noTE: After ENTER is pressed, the motor
will adjust and run according to the factory default
settings. All prior programmed settings (user defined)
will be lost.
Setting A user Program
Press the MENU button to enter the MENU mode you will
be guided through a sequential menu selection: (Please
use   keys to navigate and
A. Set Clock and Day of Week, press ENTER
Set Hours/Minutes/AM/PM and day of the week.
Days of the Week are denoted by MTuWThFSaSu
(M Monday, Tu Tuesday, W Wednesday,
Th Thursday, F Friday, Sa Saturday, Su Sunday)
Once correct day of the week is chosen, press ENTER
ee ui tart i
keys to change data.)
esired
B. Set Low Speed on Time (Monday thru Friday)
LOW will be flashing, Press ENTER. Set desired
"on" time for motor to begin running on low speed.
Use   keys to Navigate through each of the fields.
The flashing field is the active field. Using the
keys to adjust the time as desired for the low speed to
turn on. Pressing ENTER will finalize your selections.
noTE: In each Low or High Setting the user can
select the off position when selecting the hour.
off resides between the hours of 12 and 1. If off
is selected that setting will then be ignored.
C. Set Low Speed off Time (Monday thru Friday)-
LOW will be flashing. Set desired "off" time for motor
to stop running on low speed. Use   keys to
navigate through each of the fields. The flashing field
is the active field. Using the
as desired for the low speed to turn off. Pressing
ENTER will finalize your selections.
D. Set High Speed on Time (Monday thru Friday)
HIGH will be flashing, Press ENTER Set desired "on"
time for motor to begin running on high speed. Use
  keys to navigate through each of the fields. The
flashing field is the active field. Using the
adjust the time as desired for the high speed to turn
on. Pressing ENTER will finalize your selections.
E. Set High Speed off Time (Monday thru Friday)
HIGH will be flashing. Set desired "off" time for motor
to stop running on high speed. Use   keys to
navigate through each of the fields. The flashing field
is the active field. Using the
as desired for the high speed to turn off. Pressing
ENTER will finalize your selections.
F. Set Low Speed on Time (Saturday and Sunday)
Press ENTER Set desired "on" time for motor to begin
running on low speed. Use   keys to navigate
through each of the fields. The flashing field is the
active field. Using the
desired for the low speed to turn on. Pressing ENTER
will finalize your selections.
G. Set Low Speed off Time (Saturday and Sunday)
Set desired "off" time for motor to stop running on low
speed. Use   keys to navigate through each of the
fields. The flashing field is the active field. Using the
keys, adjust the time as desired for the low speed to
turn off. Pressing ENTER will finalize your selections.
2EZ Speed Pool Motor with Programmable Control/Timer
TM
keys, adjust the time
keys
keys, adjust the time
keys adjust the time as
11