Speck pumps BADU ECOM2/S90 Installation, Operating And Service Manual page 17

M017837080000 REV. January 19, 2011
user Interface Identi cation
This section describes the user interface in detail, including buttons, and LCD data.
1
Low High
1 : AM
2
MTuWThFSaSu
3
Press Enter to Con rm
www.nidec-motor.com/Pool
HIGH SPEED
o ErrIDE
In MEnu mode, the clock and day of the week will be used to set the Clock, On Time,
1
and Off Time for all settings, and while in RUN mode, it will display the set time and day
of the week.
When setting the clock, the user will be prompted to also the select the current day of
2
the week. While in RUN mode the current day of the week will be illuminated based on
the user setting.
Press Enter to Con rm is illuminated during the MENU mode, This will remind the
3
user that pressing enter will confirm the settings the user has selected. While in MENU
mode, a second press of the enter key will move the navigation forward to the next
menu item even if there is no change made to that particular setting.
Program
MEnu
Set Clock
Set on Time
Set off Time
override
LoW SPEED
o ErrIDE
run / SToP
EnTEr
2EZ Speed Pool Motor with Programmable Control/Timer
TM