Installation Manual – BTS3606 Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
1.4.2 Unpacking Wooden Case
Caution:
Do not put the wooden case upside down. Otherwise, the equipment will suffer severe
damages.
Wooden cases are generally used to pack heavy objects like racks, batteries, and so on.
A rack is usually packed with wooden boards, steel edges, tongues and foamed angle
wraps.
It is recommended to move the packing case into or near the equipment room (if
possible) to avoid damage to the cabinet during the transportation. The unpacking
procedure is as follows:
1)
Insert one end of the ejector lever into a hole of the tongue on the cover of the
wooden case.
2)
Turn the ejector lever to straighten the tongue, as shown in Figure 1-1. You can
also use a screwdriver or a hammer to handle the tongue.
Woodenboard
Tongue
Spanner
Figure 1-1 Straightening the tongues
3)
After straightening all the tongues on the cover, remove the cover, as shown in
Figure 1-2.
Steeledge
Huawei Technologies Proprietary
1-6
Chapter 1 Installation Preparations