Operation; Ac Current Measurement - AEMC 500 User Manual

4.1

AC Current Measurement

• Turn the rotary range switch to the
• Press the lever to open the jaws.
• Clamp the jaws around the conductor to be measured.
• Immediately unclamp the meter from the conductor under test if
overload "
• If reading is unstable and is hard to read, push the HOLD button
and read the measurement.
WARNING: Remove test leads before measuring current.
OK
8
1.800.561.8187
CHAPTER 4

OPERATION

" is displayed.
www.
range.
NO
(two conductors
from different
phases)
Clamp-on Meter Model 500
information@itm.com
.com
MODEL 500
®
CL AMP METER
I N S T R U M E N T S
600V CAT II
400A
300V CAT III
H HOLD
W
V
A
OFF
COM
!
CAT II
600V