Battery Replacement - AEMC 500 User Manual

Clamp-on meter

Hide thumbs Also See for 500:

Table of Contents

5.3

The clamp-on meter Model 500 is powered by two AA 1.5V batter-

ies. The

voltage drops below proper operating range. This indicates that the

batteries need to be changed. It is recommended to replace both bat-

teries at the same time.

• The meter must be in the OFF position and disconnected from

any circuit or input.

• Place the meter face down and loosen the battery cover screw

with a flat head screwdriver.

• Replace the old batteries with two fresh 1.5V AAA size batteries.

• Replace the battery compartment cover and tighten down the

screw.

Clamp-on Meter Model 500

1.800.561.8187

Battery Replacement

symbol will appear on the LCD display when the supply

www.

information@itm.com

.com

Table of Contents