During Gauging - Honeywell HERMetic UTImeter Gtex Chem Operation And Service Manual

10.2.2 During gauging

When the unit is already switched on and working, it is always
possible to see what power is left with the battery by entering
the settings menu:
• Press on "+" to enter the settings menu,
• Press on "enter", "LED menu" is displayed,
• Press on "+"; "T. unit" is displayed,
• Press on "+", "Resol." is displayed,
ON
38 www.tanksystem.com
UTImeter
Ver x.xx
Battery
47%
░ ░
Init.
*********
25.94°C
+
+
-
E
Settings
• Press on "+", "Language" is displayed,
• Press on "+", "Battery" is displayed,
• Press on "enter",
• The remaining battery power is displayed in percentage and
as a bar-graph; pressing "+" again allows to see the tension
of the battery (B); the last information (A) is internal.
• Press "-" two times to come back in measurement mode.
LED menu
+
T. unit
+
Resol.
+
Language
+
E
-
Battery
Figure 10-3
-
47%
░ ░
+
B 7.62 V
+
A 3.22 V
+