Table of Contents
Advertisement
2.7 PnP/PCI Configurations
Reset Configuration Data
Resources Controlled By
x
IRQ Resources
PCI/VGA Palette Snoop
** PCI Express relative items **
Maximum Payload Size
↑ ↓ ←
→
:Move
F5: Previous Values
□ Reset Configuration Data
Select Enabled to reset Extended System Configuration Data (ESCD) when you exit
BIOS setup utility, if you have installed new add-on card and the system
reconfiguration has caused such a serious conflict that the OS cannot boot.
□ Resources Controlled By
BIOS can automatically configure all the boot and Plug and Play compatible devices.
If you choose Auto, you cannot select IRQ DMA and memory base address fields,
since BIOS automatically assigns them.
□ PCI/VGA Palette Snoop
Select PCI/VGA Palette Snoop Enabled/Disabled.
□ Maximum Payload Size
Set maximum TLP payload size for the PCI Express devices. The unit is byte.
FEB-9457 User's Manual
Phoenix – AwardBIOS CMOS Setup Utility
PnP / PCI Configurations
[
[ Auto(ESCD) ]
[ Disabled ]
[ 128 ]
Enter:Select
+/-/PU/PD:Value
F6: Fail-Safe Defaults
Disabled
]
Press Enter
F10:Save
32
Item Help
Menu Level
Default is Disabled,
Select Enabled to
reset Extended System
Configuration Data
ESCD) when you exit
Setup if you have
Installed a new add-on
and the system
reconfiguration has
Caused such a serious
Conflict that the OS
Cannot boot
ESC:Exit
F1: General Help
F7: Optimized Defaults
Advertisement
Table of Contents
