auna US-10028155 Manual page 31

No stations are found.
Noise with FM reception.
Alarm does not work.
NetRemote does not show or
connect to KR-200
All other undetermined
cases.
- Check the network
- Try it later. It is possible that stations are
currently unavailable.
- The link of a manually-added station is no
longer current.
- Check/move the antenna
- Move the radio
-- Switch on the alarm clock
- Check the sound level
- The alarm source is a station, but there is no
network connection.
- Change the alarm source or restore the
connection.
- Reopen the App. - If you have several streaming
from several devices at the same time, it
may cause crash, reboot KR-200 and/or your
device.
- KR-200 may process large amount of data
after a period of operation,
no matter in which mode, it will cause the
system freeze or malfunction.
Reboot KR-200 if necessary.
- The normal function of the product may be
disturbed by strong Electro-
Magnetic Interference. If so, simply reset the
product to resume normal
operation by following the instruction
manual. In case the function could not
resume, please use the product in other
location.
- The device may malfunction when used
in areas with strong radio interference. The
device will work properly again once there is
no more interference.
EN
31