Fm Radio - auna US-10028155 Manual

EN

FM RADIO

The FM radio mode receives analogue radio signals, and the display shows
the RDS information (Radio Data System) from the station.
Press Select to find a station. The frequency display will appear as soon as
the device starts scanning the FM frequency band. Alternatively, you can
search the frequencies by holding down < or >, or you can quickly change
from station to station by briefly pressing the keys or turning the navigation
wheel.
Presets
Press and hold Preset to add a station to the memory. The display will show
you the memory screen after a short time. Select one of the 10 available
locations, and confirm by pressing the NAVIGATE / VOL+/- / OK button.
Press Preset to access preset stations. When a stored station is played,
P1–P10 will appear on the display. The buttons P1–P10 on the remote
control can be used to access the stored stations.
Playback information
While a station is being played, the display will show its frequency and, if
available, RDS information, e.g., the name of the program or the name of
the title. If no RDS information is available, the display will show only the
frequency. Stereo transmissions are indicated at the top of the screen. Press
Info repeatedly for more information.
Settings
27