Front Panel Controls; Up And Down Buttons - Amana PHWT-A200 User Manual

6) FRONT PANEL CONTROLS

THERMOSTAT SYSTEM MODE BUTTON:
Press System Mode button until desired mode is
underlined, after 2 seconds with no button press the
underlined system mode is entered.
AUTO = automatically selects heat/cool mode as
needed (may be disabled in installer settings)
OFF = thermostat stops all heating or cooling functions
HEAT = thermostat permits heating operation
COOL = thermostat permits cooling operation
THERMOSTAT FAN BUTTON:
Press Fan Mode button until desired mode is
underlined, after 2 seconds with no button press the
underlined fan mode is entered.
FAN AUTO = fan operates in low or high speed mode as
needed during a call for heating or cooling activation
only.
FAN LOW = fan operates continuously in LOW speed,
with the heating or cooling components cycling on and
off in the background as needed.
FAN HIGH = fan operates continuously in HIGH speed,
with the heating or cooling components cycling on and
off in the background as needed.
System Mode Button
Fan Mode Button

UP AND DOWN BUTTONS:

UP / DOWN = used for raising or lowering the target set
temperature and selecting user options and settings in
the display screen.
The temperature that is shown at all times in normal
operation is the target set temperature.
To view current ambient room temperature while in
Auto, Heat, or Cool mode, perform a single press of
BOTH the Up and Down buttons at the same time.
Note: to adjust the target set temperature, first ensure
that the thermostat is in either Auto, Heat, or Cool
mode, and press either the Up or Down buttons until
the desired target temperature is reached. Presses to
the Up or Down buttons will have no effect when the
thermostat is in Off mode.
UP button
DOWN button