Advertisement
Quick Links
As a professional installer you have an obligation to
know the product better than the customer. This includes
all safety precautions and related items. Prior to actual
installation, thoroughly familiarize yourself with this
Instruction Manual. Pay special attention to all safety
warnings. Often during installation or repair it is possible to
place yourself in a position which is more hazardous than
when the controlled unit is in operation. Remember, it is
your responsibility to install the product safely and to know
it well enough to be able to instruct a customer in its safe
use. The precautions listed in this Installation Manual are
intended as supplemental to existing practices. However,
if there is a direct conflict between existing practices and
the content of this manual, the precautions listed here take
precedence.
PROP 65 WARNING
FOR CALIFORNIA CONSUMERS
www.P65Warnings.ca.gov
Our continuing commitment to quality products may mean a change in specifications without notice.
IO-923
09/2019
PTAC Wired Kit (DS02G-H)
Installation Instructions
WARN ING
-
is a registered trademark of Maytag Corporation or its related companies and is used under license. All rights
Model: DS02G-H
Only personnel that have been trained to install,
adjust, service or repair(hereinafter, "service")
the equipment specified in this manual should
service the equipment. The manufacturer will
not be responsible for any injury or property
damage arising from improper service or service
procedures. If you service this unit, you assume
responsibility for any injury or property damage
which may result. In addition, in jurisdictions
that require one or more licenses to service the
equipment specified in this manual, only licensed
personnel should servise the equipment.
Improper installation, adjustment, servicing or
repair of the equipment specified in this manual,
or attempting to install, adjust, service or
repair the equipment specified in this manual
without proper training may result in product
damage, property damage, personal injury or
death.
0140M00517-A
reserved.
WARNING
PTAC DIRECT SALES, INC.
185 S. Kimball Ave., Suite 130
Southlake, TX 76092
877.454.7822 (T)
Advertisement
Related Manuals for Amana PTAC DS02G-H
Summary of Contents for Amana PTAC DS02G-H
- Page 1 PTAC Wired Kit (DS02G-H) Installation Instructions Model: DS02G-H As a professional installer you have an obligation to know the product better than the customer. This includes WARNING all safety precautions and related items. Prior to actual Only personnel that have been trained to install, installation, thoroughly familiarize yourself with this adjust, service or repair(hereinafter, “service”) Instruction Manual.
-
Page 2: Thermostat Mounting
Thermostat Mounting 1. Route wires through the rectangular opening on the 1. For new construction, select thermostat mounting flush-mount base extension if used, and through th location about five feet above the flo , on an inside label in the area marked by a circle on the mounting wall, out of direct sunlight, away from sources of base plate. -
Page 3: Door Switch Wiring
Wired Door Switch Option (skip if not using door Once you are in the configuration program, you can use switch) the FAN button to move through the various configuration NOTE: Thermostat has motion sensing capability settings. The (+) or (-) keys will move up or down for energy management operation, and thermostat the selectable codes that you can change for each may be connected to a wired door switch if desired... -
Page 4: Configuration Table
CONFIGURATION TABLE Configuration Configuration Feature Description Option Option Code Code Menu Start press Fan button for 1st code none “B” T-stat Terminal Wired T-stat reversing valve signal (“B” or “O”) “O” T-stat Terminal * Heat Pump Unit Type EL * Cooler with Electric Heat * Low Temperature Limited Set Point 60-91°F (but not more than CH);... - Page 5 Final Assembly Note: Once a thermostat has been bound to Zigbee 1. Slide top of the thermostat down at a slight angle and network, it must be removed from that network per the instructions above before binding it to a press onto the mounting base plate to snap into place.
- Page 6 THIS PAGE IS INTENTIONALLY LEFT BLANK...
- Page 7 THIS PAGE IS INTENTIONALLY LEFT BLANK...
- Page 8 PTAC DIRECT SALES, INC. 185 S. Kimball Ave., Suite 130 Southlake, TX 76092 877.454.7822 (T) is a registered trademark of Maytag Corporation or its related companies and is used under license. All rights reserved.