Quick Start - Volvo ROADANDTRAFFICINFORMATIONSYSTEM(RTI) Operating Manual

Quick start

On
The ignition key must be in position I or II.
Press on one of the buttons on the remote
control or the steering wheel keypad. The
system may need several seconds to sense
the car's position and motion when you have
turned on the ignition.
Off
Scroll the navigator to [ Shut down
ENTER.
NOTE! The system is also accessible when
the engine is switched off. Remember to turn
the ignition key to position 0 when the system
is not being used as the battery can
otherwise discharge.
Basic functions
Navigator - Moving up, down, right or left
between different menu options.
ENTER - Confirms or activates options.
BACK - Return to menu structure or to undo
a choice.
NOTE! The remote control has the same
functions as the keypad.
Guidance to street address
1. Start from main menu. Select
and press ENTER.
Street address
2. Select
3. Scroll the navigator to the required
letters to specify the country and city for
the street address.
] and press
4. If the selected address has a street
number then this can also be stated to
obtain a more precise navigation. Instead
of street number, a junction (crossroads)
can be specified.
Start guidance
5. Select
In a few seconds the system calculates the
route and distance to the destination entered.
The system guides to the specified desti-
nation and provides voice messages on route
options and junctions.
For smaller localities there are no street
addresses stored in the system. The centre of
the locality should always be selected as the
destination.
Guidance to facility
Destination
1. Start from main menu. Select
nation
and press ENTER. 2. Select
Select
press ENTER.
3. Scroll the navigator to the required
letters to specify the country and city for
the facility. Press ENTER.
4. Choose type of facility, such as petrol
station, restaurant or Volvo Dealer. Scroll
DOWN to the list. Select facility type
with UP or DOWN and press ENTER.
and press ENTER.
5. Scroll DOWN to the list. Select facility
name using UP or DOWN and press
ENTER.
6. Select
In a few seconds the system calculates the
route and distance to the destination entered.
The system guides to the specified facility
and gives voice messages on route options
and junctions.
Introduction
Desti-
. Press ENTER.
Facilities
and press ENTER.
Facilities
in the submenu and
Start guidance
and press ENTER.
11