Table of Contents
Advertisement
[Settings] [Route options]
Route options settings
Route type: Select fastest or shortest route at route calculation. If
Route type Fast
is selected the system chooses the biggest roads. If
Route type Short
is selected the system prioritises route length above
road quality and road size.
Avoid toll roads: Choose whether toll roads are to be avoided at route
calculation.
Av. motorways: Choose whether motorways are to be avoided at route
calculation.
Avoid ferries: Choose whether car ferries are to be avoided at route
calculation.
Av. traffic msg.: Choose whether the system is to register traffic
messages at route calculation, see page 50.
Reset to factory settings: Reset to basic settings.
For technical reasons the system only uses big roads at route calcu-
lation for longer distances. When
motorways they will be avoided as far as possible and only used if no
other reasonable alternative is available.
NO
is selected for toll roads and
[Settings] [Screen]
Screen settings
Facility selection: The facility symbols the system is to show or hide on
the map are selected from a submenu.
Navigation menu: Choose between displaying the main menu with
Text or Icons.
Compass: Choose whether the compass is to be displayed on the
screen.
Dest. compass: Points in the direction of the destination.
Time/dist. to go: Indicates calculated journey time and distance to the
destination.
Current location: Choose whether the name of the street being
negotiated is to be displayed on the lower part of the screen.
Next guidance: Information on the next guidance point such as
distance to it, street name, road sign information and type of
manoeuvre.
Map: If the map is hidden the system guides with an arrow.
Reset to factory settings: Reset to basic settings.
Navigation settings
59
Advertisement
Chapters
Table of Contents
