Table of Contents
Advertisement
Introduction
Before starting
On
The ignition key must be in position I or II.
Press on one of the buttons on the remote
control or the steering wheel keypad. The
system may need several seconds to sense
the car's position when you have turned on
the ignition.
Off
Scroll the navigator to
[Shut down]
ENTER.
NOTE! The system is also accessible when
the engine is switched off. Remember to turn
the ignition key to position 0 when the system
is not being used as the battery can
otherwise discharge.
Basic functions
Navigator - Moving up, down, right or left
between different menu options.
ENTER - Confirms or activates options.
BACK - Return to menu structure or to undo
a choice.
Settings
Each settings menu for System, Screen,
Route options and Traffic information is
Navigation settings
reached under
10
Demo
The demo demonstrates the system (when
the car is stationary) by simulating a journey
to a specified destination. The navigation is
demonstrated on the screen, see page 60.
Manual structure
The manual is divided into chapters/
functions. At the end of the manual is an
and press
alphabetical register, before which is a page
of usual questions and answers.
The manual outlines the use of the keypad in
the steering wheel, but the remote control
can be used instead as it has the same
functions.
Search path
Menu options are outlined in the manual in
brackets, i.e.
[Destination].
outlined without brackets, i.e.
The search path with menus and successive
menu options is outlined as i. e.
Main menu [Settings] [System]
.
Menus are
Main menu.
.
Advertisement
Chapters
Table of Contents
