Assembly and Operation Instructions
881 and 881CT—Floor Operation (cont'd)
6. Select the shoe for the size of conduit to be bent.
Insert the shoe with the shoe size marking facing up.
Align either the EMT or Rigid/IMC hole with the yoke
and insert the yoke pin (G). Secure the yoke pin with
a hitch pin clip (E).
7. Remove one hitch pin clip from the roller shaft.
Greenlee / A Textron Company
881 and 881CT Cam Track
8. Lift the connecting bar and insert the follow bar.
Note: Insert the end marked START.
9. Reinsert the hitch pin clip into the roller shaft.
7
®
Hydraulic Benders
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070