Greenlee 881 Cam Track Instruction Manual page 14

Hydraulic benders and bending table
Table of Contents

Advertisement

Assembly and Operation Instructions
881 and 881CT with 1813 Bending Table (cont'd)
START
17. Insert the follow bar into the bender with the end
marked START, as shown.
18. Support the rear of the follow bar on the pipe
vise unit.
Greenlee / A Textron Company
881 and 881CT Cam Track
19 and 20. Insert the ram positioner (33).
21. Attach the hydraulic fitting unit (29) to the ram, and
connect the hose to the fitting unit. Set the cylinder
and yoke unit on the follow bar. Rotate the pump
control lever counterclockwise.
14
®
Hydraulic Benders
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070

Advertisement

Table of Contents
loading

This manual is also suitable for:

881ct cam track1813

Table of Contents