Assembly And Operation Instructions - Greenlee 881 Cam Track Instruction Manual

Assembly and Operation Instructions

881 and 881CT—Floor Operation (refer to Identification—Major Components)
1. Lay out the connecting bars (C), roller unit (D), and
two hitch pin clips (E).
CONNECTING BAR
WITH BENDING
INSTRUCTIONS DECALS
2. Attach the roller unit to one of the connecting bars
with a hitch pin clip, as shown.
DECALS
FACE OUTWARD
3. Repeat Step 2 for the other connecting bar.
Greenlee / A Textron Company
881 and 881CT Cam Track
4. Position the ram and cylinder block so that, from the
operator's point of view, the ram scale is up and to
the left of the ram.
5. Attach the yoke (B) to the ram with the spring clip (H).
6
®
Hydraulic Benders
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
RAM TRAVEL
SCALE