Greenlee 881 Cam Track Instruction Manual page 16

Assembly and Operation Instructions
881 and 881CT with 1813 Bending Table (cont'd)
26. Remove the cylinder block pin from the 3 inch
conduit hole in the connecting bar. Rotate the pump
control lever clockwise to retract the ram. Position
the cylinder block at the proper location for the size
of conduit to be bent. Insert the two cylinder block
pins (F) through the connecting bars and through the
cylinder block. Secure the pins with two hitch pin
clips (E).
27. Remove the yoke pin from the ram positioner.
Greenlee / A Textron Company
881 and 881CT Cam Track
28. Remove the ram positioner from the connecting
bar unit.
29. Load the shoe into the bender with the saddle pin
hole to the left, as shown.
16
®
Hydraulic Benders
SADDLE PIN
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070