Changing The Channel Steps - Yaesu FTA-250L Operating Manual

Changing the Channel Steps

The synthesizer of the FTA-250L provides the option
of utilizing 8.33*/25 kHz channel steps.
* 8.33 kHz; Europe only
1. [ MENU ] à "SETUP" à "COMM SETUP" à "FREQ
STEP".
2. S e l e c t " 2 5 K H Z " o r
"8.33KHZ" by pressing the
[ ▲ ] or [ ▼ ] key, and then
press the [ ENT ] key.
3. Press the PTT switch to return to normal opera-
tion.
Note: When you set the channel step to 8.33 kHz,
the channel display differs from actual operat-
ing frequency; see the chart below. However,
the operator (pilot, tower, control, etc.) will call
out the frequency according to what the display
indicates.
FTA-250L O
perATing
a
dvanCed
M
AnuAL
o
peratIon
Operating
Frequency
8.33 kHz Step
1**.0000 MHz
1**.0083 MHz
1**.0166 MHz
1**.0250 MHz
1**.0333 MHz
1**.0416 MHz
1**.0500 MHz
1**.0583 MHz
1**.0666 MHz
1**.0750 MHz
1**.0833 MHz
1**.0916 MHz
 The adjacent channel selectivity will be slightly
degraded while receiving using 8.33 kHz channel
steps.
Display
25 kHz Step
1**.005 1**.000
1**.010
1**.015
1**.030 1**.025
1**.035
1**.040
1**.055 1**.050
1**.060
1**.065
1**.080 1**.075
1**.085
1**.090
27 27