Noise Cancellation; Tot Feature - Yaesu FTA-250L Operating Manual

Noise Cancellation

To cancel background noise when transmitting and
receiving.
Enables/disables the Noise-canceling function of the
transmitter and receiver independently.
1. [ M E N U ] à " S E T U P " à " C O M M S E T U P " à
"NOISE CANCEL".
2. S e l e c t " T X M O D E " b y
pressing the [ ◄ ] or [ ► ]
key, and then press the
[ ENT ] key.
3. Press the [ ◄ ] or [ ► ] key to select "ON" or "OFF",
and then press the [ ENT ] key.
4. Select "RX MODE" by pressing the [ ◄ ] or [ ► ] key,
and then press the [ ENT ] key.
5. Select the noise level from "LV 1" through "MAX"
or "OFF" by pressing the [ ◄ ] or [ ► ] key, and then
press the [ ENT ] key.
6. Press the PTT switch to return to normal opera-
tion.
22 22
a o
dvanCed peratIon

TOT Feature

The TOT (time-out timer) shuts off the transceiver af-
ter continuous transmission exceeds the programmed
time. This feature prevents unintended transmission
by mistake and reduces battery consumption.
1. [ M E N U ] à " S E T U P " à " C O M M S E T U P " à
"TX TOT".
2. Select the desired TOT
time by pressing the [ ◄ ]
or [ ► ] key, and then press
the [ ENT ] key.
The setting changes in the following order.
Tip: The default setting: 5 MIN
3. Press the PTT switch to return to normal opera-
tion.
1 à 2 à 3 à 4
FTA-250L O
perATing
à 5 (MIN)
M
AnuAL