Listening To Fm/Am Radio (Rx-V485); Setting The Frequency Steps - Yamaha RX-V485 Owner's Manual

Listening to FM/AM radio (RX-V485)

Setting the frequency steps

(Asia, Taiwan, Brazil, General, and Central and South America models only)
At the factory, the frequency step setting is set to 50 kHz for FM and 9 kHz for AM.
Depending on your country or region, set the frequency steps to 100 kHz for FM and
10 kHz for AM.
1
Set the unit to standby mode.
2
When holding down STRAIGHT on the front panel, press z
(power).
z (power)
PROGRAM STRAIGHT
3
Press PROGRAM to select "TU".
LINK MASTER
OUT 2 -R es
Hi ENHANCER
ECO
TU••••FM50/AM9
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR
4
Press STRAIGHT to select "FM100/AM10".
5
Press z (power) to set the unit to standby mode and turn it on
again.
This completes the settings.
50
En