KX61-3, KX71-3 WSM-M
Specifications
(1) MAX PRIMARY PRESSURE
(2) MAX BACK PRESSURE
(3) RATED FLOW
(4) SECONDARY PRESSURE CHARACTRISTICS :
(5) OPRERATING TORQUE
(6) MAX. ALLOWABLE EXTERNAL TORQUE
(7) HYDRAULIC OIL
(8) OIL TEMP. RANGE
(9) FILTER
Operating specifications
(1) PRIMARY PRESSURE
2
:
6.9 NPa(70 kgf/cm
)
2
:
0.3 NPa(3 kgf/cm
)
:
15 l/min
Refer to the "Control Diagram" shown below.
:
Refer to the "Control Diagram" shown below.
:
Refer to the "MAX. allowable external torque" shown below.
:
MINERAL HYDRAULIC OIL
:
-20°C ~ 90°C
:
A filter of 40 ~ mesh and ever should be applied at the entrance of port P for preventins
the spool stickine.
2
:
3.9 NPa(40 kgf/cm
)
M-IV-20
Hydraulic System