All Fail Record; Eeprom Read; Lcd Inspection - Kubota KX71-3 Workshop Manual

Hide thumbs Also See for KX71-3:

Table of Contents

KX61-3, KX71-3 WSM-M

3-9 All Fail Record

All the accumulated failure records can be shown by selecting Other menu, Other menu, and All fail record

(See Fig.6.).

By selecting All fail record, the first hour meter items generated after shipping through the last one will be

shown.

There are 19 types of failure diagnostic items, and the details of each type of item can be checked. The hour

meter will, however, remain even after the failure records are deleted.

The data of the EEPROM can be checked by selecting Other menu, Other menu, and EEPROM read. (See

Fig.7.)

Ten items are displayed on each page in hexadecimal, and 13 pages will be used in total.

The EEPROM consists of 128 x 16 bits.

The dot type of the LCD can be checked by selecting Other menu, Other menu, and LCD check. (See Fig. 8.)

Checkered pattern 1, checkered pattern 2, and the outer frame will be displayed. Checkered pattern 1 and

checkered pattern 2 are opposite to each other in dot ON-OFF pattern. Missing dots can be checked by

using this function. (See Figs.9 and 10.)

Fig.6 All Fail Record

Fig.7 EEPROM read

Fig.8 LCD check

Fig.9 Frame Display

Fig.10 Checkered Pattern

M-V-18

Electrical System

Table of Contents

Kx61-3