Mounting The Unit - STIEBEL ELTRON HydroShark 7 Operation And Installation Manual

MOUNTING THE UNIT

1. Leave a minimum of 5" clearance on all sides for servicing.
2. Make sure the power is off.
3. Remove the cover.
4. Mount securely to wall by putting screws through mounting holes.
5. Screws and plastic wall anchors for mounting are provided.
WWW.HYDRO-SHARK.COM
UNIT MUST BE INSTALLED IN A VERTICAL POSITION WITH THE WA-
TER FITTINGS POINTING DOWNWARD. DO NOT INSTALL UNIT WHERE
IT WOULD ROUTINELY BE SPLASHED WITH WATER OR ELECTRICAL
SHOCK MAY RESULT.
A
1
B
3
C
D E
Dimensions
A
B
C
D
E
F
3 / 16
G
2
G
F
HYDROSHARK| 7