Snmp Configuration Tab; Snmp Statistics Tab - Cobalt Digital Inc BBG-1090-DEC-MPEG Product Manual

SNMP Configuration Tab

The BBG-1090-DEC-MPEG includes a built-in SNMP agent with support for SNMP V1 and
V2C. It will respond to SNMP transactions only on the control port, for security reasons. This
tab includes the parameters for the SNMP configuration. Changes to these parameters take
effect immediately.
The SNMP parameters are as follows:
• Read Community: this is the SNMP Read-Only community string.
• Write Community: this is the SNMP Read-Write community string.
• System Contact: this configures the value for the MIB-II System variable System
Contact. Whatever value entered here is returned for SNMP queries to that variable.
• System Location: this configures the value for the MIB-II System variable System
Location. Whatever value entered here is returned for SNMP queries to that variable.
• Trap Destinations: the BBG-1090-DEC-MPEG supports up to 5 trap destinations. Enter
the desired IP addresses here. Note that the BBG-1090-DEC-MPEG will only generate
SNMP V2C traps.

SNMP Statistics Tab

The SNMP statistics tab displays the current SNMP configuration.
83