Cobalt Digital Inc BBG-1090-DEC-MPEG Product Manual page 64

The following status are reported:
•
Off: The stream is not enabled (and is not transmitting).
•
OK: The stream is enabled and is transmitting correctly.
•
Overflow: The stream is set for NULL Padding with Auto Bit Rate disabled, and the
configured padding rate is not high enough to support the current stream rate. Packets are
being dropped. Either increase the padding rate, or set the port to Auto Bit Rate, or
disable NULL padding.
•
Overrun: The overall IP output capacity of the Decoder has been exceeded, and
packets are being dropped. This will happen if too many output flows are enabled,
especially if NULL padding is also enabled. Turn off unneeded streams, reduce the
NULL padding rate, or disable NULL padding if possible.
64