Cobalt Digital Inc BBG-1002-UDX-DSP Product Manual
  1. Manuals
  2. Brands
  3. Cobalt Digital Inc Manuals
  4. Media Converter
  5. BBG-1002-UDX-DSP
  6. Product manual

Cobalt Digital Inc BBG-1002-UDX-DSP Product Manual

3g/hd/sd-sdi standalone up-down-cross converter / frame sync / audio embed/de-embed with dsp audio options support
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
BBG-1002-UDX-DSP
BBG-1002-UDX-DSP
3G/HD/SD-SDI Standalone Up-Down-Cross Converter /
Frame Sync / Audio Embed/De-Embed
with DSP Audio Options Support
Product Manual
Cobalt Digital Inc.
2506 Galen Drive
Champaign, IL 61821
Voice 217.344.1243 • Fax 217.344.1245
www.cobaltdigital.com
BBG-1002-UDX-DSP-OM (V1.4)

Advertisement

Table of Contents
loading

Related Manuals for Cobalt Digital Inc BBG-1002-UDX-DSP

Summary of Contents for Cobalt Digital Inc BBG-1002-UDX-DSP

  • Page 1 BBG-1002-UDX-DSP BBG-1002-UDX-DSP 3G/HD/SD-SDI Standalone Up-Down-Cross Converter / Frame Sync / Audio Embed/De-Embed with DSP Audio Options Support Product Manual Cobalt Digital Inc. 2506 Galen Drive Champaign, IL 61821 Voice 217.344.1243 • Fax 217.344.1245 www.cobaltdigital.com BBG-1002-UDX-DSP-OM (V1.4)
  • Page 2 Furthermore, Cobalt Digital Inc. reserves the right to make changes to any products herein to improve readability, function, or design. Cobalt Digital Inc. does not assume any liability arising out of the application or use of any product or circuit described herein.

  • Page 3: Table Of Contents

    Overview ........................ 3-1 BBG-1002UDX-DSP Front Panel Display and Menu-Accessed Control....3-1 Connecting BBG-1002-UDX-DSP To Your Network........... 3-3 Finding a BBG-1002-UDX-DSP Device in DashBoard ......3-4 Control and Display Descriptions................3-5 Function Submenu/Parameter Submenu Overview........3-5 Web User Interface ..................3-6 Display Theme....................
  • Page 4 Checking BBG-1002-UDX-DSP Device Information..........3-8 Ancillary Data Line Number Locations and Ranges ..........3-9 BBG-1002-UDX-DSP Function Menu List and Descriptions......3-10 Audio DSP Setup Controls ............... 3-11 Input Video Controls ................3-25 Output Video Mode Controls ..............3-26 Scaler ......................3-27 Framesync ....................

  • Page 5: Chapter 1 Introduction

    BBG-1002-UDX-DSP 3G/HD/SD-SDI Standalone Up-Down-Cross Converter / Frame Sync / Audio Embed/De-Embed with DSP Audio Options Support unit (also referred to herein as the BBG-1002-UDX-DSP). This manual consists of the following chapters: Chapter 1, “Introduction” – Provides information about this manual •...

  • Page 6: Cobalt Reference Guides

    UI setups and other topics. Manual Conventions In this manual, display messages and connectors are shown using the exact name shown on the BBG-1002-UDX-DSP itself. Examples are provided below. Device display messages are shown like this: •...

  • Page 7: Warnings, Cautions, And Notes

    Symbol (WEEE 2002/96/EC) For product disposal, ensure the following: • Do not dispose of this product as unsorted municipal waste. • Collect this product separately. • Use collection and return systems available to you. BBG-1002-UDX-DSP-OM (V1.4) BBG-1002-UDX-DSP PRODUCT MANUAL...

  • Page 8: Safety Summary

    CAUTION unauthorized sources may cause product damage, unreliable operation, and invalidate warranty. The BBG-1002-UDX-DSP FPGA is designed for a normal-range operating temperature CAUTION around 85° C core temperature. Operation in severe conditions exceeding this limit for non-sustained usage are within device operating safe parameters, and can be allowed by setting this control to Disable.

  • Page 9: Bbg-1002-Udx-Dsp Functional Description

    Introduction BBG-1002-UDX-DSP Functional Description BBG-1002-UDX-DSP Functional Description Figure 1-1 shows a functional block diagram of the BBG-1002-UDX-DSP. The BBG-1002-UDX-DSP up/down/cross converter also optionally includes AES/analog audio support and CVBS video I/O. In addition to a basic signal presence input failover function, a Quality Check option allows failover to alternate inputs based on user-configurable criteria such as black or frozen frame.
  • Page 10 BBG-1002-UDX-DSP Functional Description Figure 1-1 BBG-1002-UDX-DSP Functional Block Diagram BBG-1002-UDX-DSP PRODUCT MANUAL BBG-1002-UDX-DSP-OM (V1.4)

  • Page 11: Video Processor Description

    Introduction BBG-1002-UDX-DSP Functional Description Video Processor Description The BBG-1002-UDX-DSP video subsystem also provides the functions described below. Input Video Select/Quality Check Functions A GUI-based control allows each of the device video inputs to be independently set as 3G/HD/SD-SDI or CVBS SD analog video. Either mode preserves waveform and/or packet-based ancillary data for extraction and usage later in the processing chain.
  • Page 12 BBG-1002-UDX-DSP Functional Description Scaler Function The scaler function provides up/down/cross-conversion to 3G/HD/SD from multiple SD and 3G/HD video formats and multiple frame rates, and cross-conversion between interlaced and progressive formats, with auto-format detect/down-conversion of SMPTE 424M/292M/259M formats. The scaler function also provides aspect ratio conversion that provides a choice from several standard aspect ratios.
  • Page 13 Introduction BBG-1002-UDX-DSP Functional Description 3G/HD/SD–SDI (from scaler) Ref VITC External SDI VITC Reference Waveform Timecode Detect/Extract Proc/Embed Video Input SDI VITC Priority/ Buffer/ ATC_VITC Detect/Extract Select Format Timecode Proc/Embed SDI ATC_VITC Detect/Extract ATC_LTC Timecode SDI ATC_LTC Proc/Embed Detect/Extract SDI Video...
  • Page 14 BBG-1002-UDX-DSP Functional Description Wings Insertion Wings insertion allows a symmetrical L-R wings insertion to be integrated into the program video output. Wings video is accommodated using a separate wings SDI input. The wings user interface displays wings timing relative to the output video, allowing wings timing offset to be adjusted such that wings can be properly framed.
  • Page 15 Introduction BBG-1002-UDX-DSP Functional Description Closed Captioning Processor This function provides support for closed captioning setup. The function allows the selection of the ancillary data line number where the ancillary closed caption data is outputted when the output is HD. When receiving...
  • Page 16 BBG-1002-UDX-DSP Functional Description The input video is checked for ARC formats and can be set to provide a trigger upon when a selected ARC format is received, the code associated with the received format can be applied to the output as a translated format (for, example, from WSS to AFD).

  • Page 17: Audio Processor Description

    Introduction BBG-1002-UDX-DSP Functional Description Trouble Slate Insertion Function Option provides for graphic insertion onto the SDI processed +T-SLATE output raster. The function allows for uploading a .png image graphic file to the card/device memory. (png files are converted to a special format using a web tool before uploading to the host card/device;...
  • Page 18 BBG-1002-UDX-DSP Functional Description (See Figure 1-4.) The audio processing subsection is built around an internal 16-channel audio bus. This 16-channel bus receives inputs from an input routing crosspoint that routes de-embedded, and discrete AES and analog audio inputs, over the 16-channel bus. Correspondingly, at the output end of...
  • Page 19 Introduction BBG-1002-UDX-DSP Functional Description Audio Down Mix Function (See Figure 1-5.) The Audio Down Mixer function provides for the selection of any five embedded channels serving as Left ( ), Right ( ), Center ( ), Left Surround ( ), and Right Surround (...
  • Page 20 BBG-1002-UDX-DSP Functional Description path positioning locates the DSP pipeline to receive Output Mixer • device Audio Bus channels and then place the DSP processed output channels directly at the device audio outputs as sources for destination Embedded Output or AES Output channels via the Output Audio Routing/Controls.

  • Page 21: Control And Data Input/Output Interfaces

    Introduction BBG-1002-UDX-DSP Functional Description Text-To-Speech Cobalt Digital is a complete 21CVAA digital text-to-speech generation / +TTS audio insertion solution for embedded and discrete audio systems. interfaces with industry standard Windows Share folder systems to +TTS receive non-proprietary text, XML, or similar plain text files, and converts and inserts realistic human-voice audio into user-configured audio channels (typically an SAP channel pair intended for this playout).

  • Page 22: Alarm Function

    (i.e., when a preset is invoked (either manually or via event-based loading), the GPO is correspondingly also activated. Serial (COMM) Ports The BBG-1002-UDX-DSP is equipped with two, 3-wire serial ports ( COM 1 - ). The ports provide for SMPTE 2020 Serial Port 1...

  • Page 23: User Control Interface

    The device can also be controlled using DashBoard™ remote control, where it appears as a frame connection. Technical Specifications Table 1-1 lists the technical specifications for the BBG-1002-UDX-DSP 3G/ HD/SD-SDI Standalone Up-Down-Cross Converter / Frame Sync / Audio Embed/De-Embed with DSP Audio Options Support unit.
  • Page 24 Technical Specifications — continued Item Characteristic Part number, nomenclature (cont.) • BBG-1002-UDX-DSP-D-DIN (4) 3G/HD/SD-SDI Inputs, (2) Balanced Analog Audio In, (6) AES Inputs, (4) 3G/HD/SDI Outputs w/ (1) relay protect, (4) AES Outputs, GPIO/COMM (RJ-45 connector) (1) Gigabit Ethernet, Looping Reference and Redundant DC Power Inputs (includes one BBG-1000-PS Power Supply;...
  • Page 25 Embedded Audio Output 16-ch embedded. User crosspoint allows routing of any embedded channel to any embedded channel output. Multi-frequency tone generator for each audio output. Master delay control; range of -33 msec to +3000 msec. 1-21 BBG-1002-UDX-DSP-OM (V1.4) BBG-1002-UDX-DSP PRODUCT MANUAL...
  • Page 26 Max V: 30 V Max P: 120 mW GPI Specifications: GPI LO @ Vin < 1.5 V GPI HI @ Vin > 2.3 V Max Vin: 9 V Redundant (or spare) AC power supply BBG-1000-PS 1-22 BBG-1002-UDX-DSP PRODUCT MANUAL BBG-1002-UDX-DSP-OM (V1.4)

  • Page 27: Warranty And Service Information

    (1) year. Cobalt Digital Inc.'s (“Cobalt”) sole obligation under this warranty shall be limited to, at its option, (i) the repair or (ii) replacement of the product, and the determination of whether a defect is covered under this limited warranty shall be made at the sole discretion of Cobalt.

  • Page 28: Contact Cobalt Digital Inc

    Contact Cobalt Digital Inc. Contact Cobalt Digital Inc. Feel free to contact our thorough and professional support representatives for any of the following: Name and address of your local dealer • Product information and pricing • Technical support • Upcoming trade show information •...

  • Page 29: Chapter 2 Installation

    • Installing the BBG-1002-UDX-DSP Note: • Where BBG-1002-UDX-DSP is to be installed on a mounting plate (or regular table or desk surface) without optional frame Mounting Tray BBG-1000-TRAY, affix four adhesive-backed rubber feet (supplied) to the bottom of BBG-1002-UDX-DSP in locations marked with stamped “x”. If feet are not affixed, chassis bottom cooling vents will be obscured.

  • Page 30: Bbg-1002-Udx-Dsp Unit Dimensions

    Tighten only finger tight. Figure 2-1 Mounting BBG-1002-UDX-DSP Using Frame Mounting Tray BBG-1002-UDX-DSP Unit Dimensions Figure 2-2 shows the BBG-1002-UDX-DSP physical dimensions and mounting details for cases where BBG-1002-UDX-DSP will be installed in a location not using the optional BBG-1000-TRAY mounting tray.
  • Page 31 REAR Notes: 1. All dimensions in inches. 2. If BBG-1002-UDX-DSP is mounted on flat surface, either rubber feet must be installed, or mounting surface must be open to mate with cooling vents on bottom of BBG-1002-UDX-DSP chassis. Figure 2-2 BBG-1002-UDX-DSP Dimensional Details BBG-1002-UDX-DSP-OM (V1.4)
  • Page 32 AES IN AES input BNC SDI OUT 3G/HD/SD-SDI processed out BNC CVBS OUT CVBS analog video output BNC AN-AUD OUT Analog balanced audio outputs AES OUT AES output BNC Figure 2-3 BBG-1002-UDX-DSP Rear Panel Connectors BBG-1002-UDX-DSP PRODUCT MANUAL BBG-1002-UDX-DSP-OM (V1.4)

  • Page 33: Gpio, Serial (Comm), And Analog Audio Connections

    + and G terminals. Note that this connection will experience a 6 dB voltage gain loss. Adjust gain for these connections accordingly. – Figure 2-4 COMM, GPIO, and Analog Audio Connector Pinouts BBG-1002-UDX-DSP-OM (V1.4) BBG-1002-UDX-DSP PRODUCT MANUAL...
  • Page 34 This page intentionally blank BBG-1002-UDX-DSP PRODUCT MANUAL BBG-1002-UDX-DSP-OM (V1.4)

  • Page 35: Chapter 3 Setup/Operating Instructions

    Perform the setup procedures here in the sequence specified. All procedures equally apply to all models unless otherwise noted. Note: All instructions here assume BBG-1002-UDX-DSP is physically connected to the control physical network as described in Chapter 2. Installation. BBG-1002UDX-DSP Front Panel Display and Menu-Accessed...
  • Page 36 Repeatedly press the button to step up through sub-menus and then to other menus. Access other menu items using buttons. The display backlight automatically brightens with any navigation arrow activity, and then goes dim after a few moments. Figure 3-1 BBG-1002-UDX-DSP Front Panel Display and Menu Controls BBG-1002-UDX-DSP PRODUCT MANUAL BBG-1002-UDX-DSP-OM (V1.4)

  • Page 37: Connecting Bbg-1002-Udx-Dsp To Your Network

    BBG-1002-UDX-DSP ships with network protocol set to DHCP and populates its address with an addressed allocated by your DHCP server. If your network does not have a DHCP server, the BBG-1002-UDX-DSP address field will be blank, and a static address must then be assigned. All initial network settings are performed using the Front Panel Display menu-accessed control (as described on the previous page).

  • Page 38: Finding A Bbg-1002-Udx-Dsp Device In Dashboard

    Connecting BBG-1002-UDX-DSP To Your Network Finding a BBG-1002-UDX-DSP Device in DashBoard (See Figure 3-2) If BBG-1002-UDX-DSP is configured with an address within a network also available via DashBoard, a BBG-1002-UDX-DSP device appears as a frame entity in the DashBoard Basic Tree View.

  • Page 39: Control And Display Descriptions

    Figure 3-3 shows how the BBG-1002-UDX-DSP device and its menus are organized, and also provides an overview of how navigation is performed between devices, function menus, and parameters.

  • Page 40: Web User Interface

    Clicking another main menu tab immediately displays the pane related to the selected main menu tab. Figure 3-4 Typical Web UI Display and Controls Display Theme (See Figure 3-5.) The BBG-1002 user interface theme selection offers light and dark themes suited for various users and environments. BBG-1002-UDX-DSP PRODUCT MANUAL BBG-1002-UDX-DSP-OM (V1.4)
  • Page 41 Default Dark is best suited for low-light environments. Light is the theme shown in this manual and is useful for normal ambient light environments such as offices. Figure 3-5 Web UI Display Themes BBG-1002-UDX-DSP-OM (V1.4) BBG-1002-UDX-DSP PRODUCT MANUAL...

  • Page 42: Checking Bbg-1002-Udx-Dsp Device Information

    Checking BBG-1002-UDX-DSP Device Information Checking BBG-1002-UDX-DSP Device Information The operating status and software version the BBG-1002-UDX-DSP device can be checked by clicking the Status main menu tab. Figure 3-6 shows and describes the BBG-1002-UDX-DSP device information status display. Note: Proper operating status is denoted by green icons for the status indicators shown in Figure 3-6.

  • Page 43: Ancillary Data Line Number Locations And Ranges

    ATC_VITC on line 9/8 and Dolby Metadata = 13 CC = 10 AFD (now on line 18) AFD = 18 Dolby Metadata = 13 resolved Card n Card 1 Figure 3-7 Example VANC Line Number Allocation Example BBG-1002-UDX-DSP-OM (V1.4) BBG-1002-UDX-DSP PRODUCT MANUAL...

  • Page 44: Bbg-1002-Udx-Dsp Function Menu List And Descriptions

    BBG-1002-UDX-DSP Function Menu List and Descriptions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 individually lists and describes each BBG-1002-UDX-DSP function menu item and its related list selections, controls, and parameters. Where helpful, examples showing usage of a function are also provided.
  • Page 45 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List Provides controls for enabling licensed DSP functions, routing inputs and outputs to and from the DSP functions, and setting individual parametric settings for Audio DSP Setup Controls each DSP function.
  • Page 46 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) Input Mixer path positioning locates the DSP pipeline to receive basic external inputs coming into the device (in this example, Emb Ch 1 and Ch 2 feeding DSP A L and DSP A R), and then allows DSP processed output channels to be directed to the device internal Audio Bus channels by selecting Audio DSP channels as sources for destination Audio Bus channels via the Input Audio Routing/Controls.
  • Page 47 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) core usage Example Multiple DSP Process Audio Routing and DSP Setup In this example, single DSP pipeline DSP A is setup to: •...
  • Page 48 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) When a DSP pipeline is enabled for any function by checking any checkbox like that shown above, the sub-tabs for the related DSP in the lower pane expose all the setup functions required for the selected processes. In this example, we’ll start with the Source Selection function since this is the first step in setting up a DSP.
  • Page 49 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) With source selection having been set, now we proceed to setting up the Upmixer. In our example we are sourcing from a stereo PCM pair, so Crossfade does not need to be considered (Mode can be set to Auto or Always Upmix). For cases where 5.1-channel PCM is used as an input, and may already carry 5.1 content, the Threshold and Auto Crossfade...
  • Page 50 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) Our final processing step in this example is setting DSP A to also provide a Dolby 5.1 encoded pair. When a Dolby encoder is checked (enabled), the Dolby Digital Encoder and Dolby Digital Encoder Metadata sub-tabs appear, which allow setup of the Dolby encoded pair.
  • Page 51 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) Routing the DSP Audio Outputs On the Card Again, depending on whether the DSP is positioned at the card input or output mixer, Audio DSP processed outputs are available as follows: •...
  • Page 52 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) As mentioned earlier, a separate DSP pipeline (DSP E) has been set up in this example to provide a SAP Dolby 2.0 pair, with this DSP being positioned at the output mixer in this example. Shown below is the routing that provides this.
  • Page 53 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) Note: This subsection of the Audio DSP presentation covers the specific controls and settings of the DSP enable setup pane, signal routing to and from DSP blocks, and the specific DSP blocks themselves. Reading and understanding the overview on the preceding pages is strongly recommended before proceeding to the descriptions below.
  • Page 54 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) • Audio DSP Pipeline Select/Setup Pane The lower pane that displays when the Audio DSP tab is opened allows “going into” each enabled DSP pipeline, and setting up attributes for the...
  • Page 55 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) Note: As noted earlier, appearance of lower sub-tabs shown here depend on DSP function(s) selected. Sub-tabs only appear where required in setting up a selected DSP function(s).
  • Page 56 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) • Real-Time Loudness Leveler Setup (Option +DSP-RTLL only) Provides controls for setting up Real Time Loudness Leveler loudness processing. Sub-Tab • Enable sets RTLL to enabled or bypassed.
  • Page 57 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) Tips for Using RTLL (cont.) Loudness Leveler Control Settings Recommendations • Loudness Target: -24 LKFS (ATSC), -23 LKFS (EBU) • Enabled (RTLL master enable control): Enabled •...
  • Page 58 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) • Dolby Decoder Setup Sub-Tab (Option +DSP-DEC only) Provides controls for setting up Dolby Decoder. Note: See Source Selection Sub-Tab (p. 3-21) for routing desired Dolby pair to decoder input.

  • Page 59: Input Video Controls

    Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Allows manual or failover selection of SDI program video inputs and displays status and raster format of received SDI video. Input Video Controls • Input Video Source Selects the input video source to be applied to the program video input.

  • Page 60: Output Video Mode Controls

    BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Allows selection of each of the four video output coaxial connectors as processed SDI out or reclocked SDI out. Also provides CVBS parameter controls and test pattern output controls for device CVBS output.

  • Page 61: Scaler

    Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Provides up/down/cross-converter, aspect ratio controls, and user H/V controls. Scaler • Scaler Enable Control Enables or disables Scaler function. Note: When scaler is disabled, all ancillary data is passed from input to output intact.
  • Page 62 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) • 3:2 Alignment Optimization Selector Provides selection to optimize 3:2 pulldown conversion where timecode or other selections shown are to be relied upon to indicate frame transitions.
  • Page 63 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) • Standard Quick Set Aspect Ratio Selects between the standard preset Aspect Ratio Conversions (ARC) Conversion Selectors shown below. Note: • The Scaler follow AFD control also appears on the AFD/WSS/VI tab and is mutually ganged with the selection performed on either tab.
  • Page 64 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Provides video frame sync/delay offset control and output control/loss of program video failover selection controls. Framesync • Framesync Enable/Disable Control Provides master enable/disable of all framesync functions/controls.
  • Page 65 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) • Program Video Output Mode Select Provides a convenient location to select between device program video output and other technical outputs from the choices shown to the left and described below.
  • Page 66 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) With framesync enabled, provides the following controls for offsetting the • Output Video Reference Offset Controls output video from the reference: • Vertical (Lines) – sets vertical delay (in number of lines of output video) between the output video and the frame sync reference.

  • Page 67: Input Audio Status

    Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Displays signal status and payload for embedded and discrete audio received by the device. Input Audio Status Individual signal status and peak level displays for embedded audio input pairs, and AES/analog input pairs as described below.
  • Page 68 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Provides audio routing, gain, per-channel/bulk audio delay controls, and audio meters. These controls route selected audio sources onto the 16-channel internal bus (which is used for all audio processing).
  • Page 69 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) Note: • Default factory preset routing routes embedded Ch 1 thru Ch 16 to bus channels Audio Bus Ch 1 thru Ch 16.
  • Page 70 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) • Per-Channel Audio/Video Delay Offset Controls Offset control adds or reduces (offsets) channel audio delay from the matching video delay (audio delay offset setting adds or removes delay in addition to any delay included by other actions).
  • Page 71 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Input Flex Mix – Provides a 16-channel mixer in which each of the inputs can be mixed onto up to 16 independent output summing nodes.
  • Page 72 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) Note: • Flex Mix input channels Flex Mix 2 thru Flex Mix 16 have controls identical to that described here for Flex Mix 1. Therefore, only the Flex Mix 1 controls are shown here.
  • Page 73 Gain controls allow relative gain (in dB) control for the corresponding destination Embedded Audio Group channel. (-80 to +20 dB range in 1.0 dB steps; unity = 0 dB) Note: Although the BBG-1002-UDX-DSP can pass non-PCM data such ® as Dolby E or AC-3, setting the gain control to any setting other than default 0 will corrupt Dolby data.
  • Page 74 Gain controls allow relative gain (in dB) control for the corresponding destination AES output channel. (-80 to +20 dB range in 1.0 dB steps; unity = 0 dB) Note: Although the BBG-1002-UDX-DSP can pass non-PCM data such ® as Dolby E or AC-3, setting the gain control to any setting other than default 0 will corrupt Dolby data.
  • Page 75 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Provides an audio crosspoint allowing the audio source selection for each analog audio output channel. Also provides Gain, Phase Invert, and Muting controls and peak level meters for each output channel.
  • Page 76 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Provides audio down-mix audio routing selections that multiplexes any five audio channel sources into a stereo pair. • Downmixer Source Controls Left Channel Input thru Right Surround Channel Input select the five audio bus source channels to be used for the downmix.
  • Page 77 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Output Flex Mix – Provides a 16-channel mixer in which each of the inputs can be mixed onto up to 16 independent output summing nodes.

  • Page 78: Timecode

    BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Provides timecode data extraction from various sources, and provides formatting and re-insertion controls for inserting the timecode into the output video. Timecode Shown below is an example in which received 525i 5994 SDI video is being up-converted to 720p 5994. To re-format and insert the timecode data, the following can be performed using the Timecode function.
  • Page 79 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) Audio LTC controls described below only appear on devices with +LTC licensed optional feature. This feature allows audio LTC from an audio channel to be used as a timecode source, with conversion to a selected SMPTE 12M format on the output video.
  • Page 80 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) • Source Priority Selects the priority assigned to each of the four supported external formats, and internal Free Run in the event the preferred source is unavailable.
  • Page 81 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) • Output Status Display Displays the current content and source being used for the timecode data as follows: • Output status OK (in this example, SDI VITC timecode received and outputted).
  • Page 82 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) • HD ATC_LTC Insertion Control For HD output, enables or disables ATC_LTC timecode insertion into the output video, and selects the line number for ATC_LTC timecode data.

  • Page 83: Reticules

    Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Allows Safe Action and/or Safe Title overlays and other static markers to be added to the output video image. Reticules Typical Reticule/Overlay Marker Insertions Any combination of the reticule/overlay markers can be applied to the output video.
  • Page 84 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) • Safe Title Area (STA) Controls • STA provides enable/disable of safe title area graticule insertion. • STA Height and STA Width control height and width of insertion (from 0% to 100% of 4:3 outputted image area).
  • Page 85 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) • Center Cross Controls • Center Cross provides enable/disable of center cross insertion. • Cross Height and Width control height of vertical line and width of horizontal line (from 0% to 100% of 4:3 outputted image area).

  • Page 86: Video Proc/Color Correction

    BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Provides the following Video Proc and Color Correction parametric controls. • Video Proc Video Proc (Enable/Disable) provides master on/off control of all Video Proc functions. • When set to Disable, Video Proc is bypassed.
  • Page 87 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Provides color corrector functions for the individual RGB channels for the program video path (option +COLOR). • Color Corrector Color Corrector (On/Off) provides master on/off control of all Color Corrector functions.
  • Page 88 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) • Black Hard Clip Applies black hard clip (limiting) at specified percentage. (-6.8% to 50.0%; null = -6.8%) • White Hard Clip Applies white hard clip (limiting) at specified percentage.

  • Page 89: Video Quality Events

    Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (Option +QC only) Sets quality check screening and thresholds for video quality event alerts. When a quality events occur, the event(s) can be used by the Event Setup function to invoke input routing or other changes.

  • Page 90: Audio Events Setup

    BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (Option +QC only) Sets audio level screening and thresholds for audio silence/presence event alerts on embedded and/or AES discrete audio in. When an audio events occur, the event(s) can be used by the...

  • Page 91: Closed Captioning

    Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Provides support for closed captioning setup.Also provides controls for setting closed captioning absence and presence detection thresholds. Closed Captioning Note: When receiving HD-SDI, both CEA 608 and CEA 708 are supported, with CEA 608 and CEA 708 (containing CEA 608 packets) converted to line 21 closed captioning on outputs down-converted to SD.
  • Page 92 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Allows assignment of AFD, WSS and/or VI codes to the SDI output video, and allows custom ARC settings to be applied for each code. Also allows translations between WSS, VI, and AFD active ARC formats.
  • Page 93 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) Shown below is an example in which received 525i5994 SDI video is being up-converted to 720p5994. The settings shown in the example below provide for directing the scaler to re-aspect the 4:3 input video to full, centered 16:9 re-aspecting, and mark the output video with the AFD code representing the new re-aspected H/V format.
  • Page 94 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued AFD/WSS/VI sub-tab provides prioritized and gated input monitoring for AFD, WSS and/or VI formats. Also provides translation between input and output AFD, WSS, and VI ARC formats.
  • Page 95 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) • Input Triggering Controls Individual ARC format input controls allow accepting or rejecting received ARC formats as follows: • Trigger on AFD: • Off rejects AFD-coded triggering.
  • Page 96 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) TransMATX AFD/WSS/VI Translation Matrix The table below lists valid translations between WSS, VI, and SMPTE 2016 AFD codes for both 4x3 and 16x9-coded frames. Input...
  • Page 97 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued AFD Map sub-tab allows bidirectionally re-aspecting from 4x3 frames to companion 16x9 frames, and allows customizing aspect ratio settings for the AFD codes (and the corresponding WSS and VI translation equivalents) supported by the device.
  • Page 98 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Provides user-configurable burn-in of up to two text strings and timecode on output video. Character Burner Note: Ident 1 and Ident 2 sub-tabs provide identical, independent controls for inserting two independent text (identification) burn-in overlays on the output video.
  • Page 99 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) • Ident Position Select Sets the location of the ident text insertion from choices shown or custom. (When Custom is selected, position is configured using the Ident Text Positioning Controls described below.)
  • Page 100 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) • Text Box Sizing Controls Provides controls for setting the size of the burn-in text background box. • Auto allows text box to proportionally size with selected text size.
  • Page 101 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) • Timecode Attributes Controls Sets burn-in size/position attributes as follows: • Character Size sets character size (in pixels). • Text Justification selects from left, right, or center-aligned justification within the text box overlay.
  • Page 102 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) Positioning with H and V controls at zero (origin) (Size = 3) Positioning with H and V controls both at 50 (Size = 3) x= 100%...

  • Page 103: Moving Box Insertion

    Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Provides a “moving box” graphic insertion (overlay) on the output video. Moving-box insertion can serve as a dynamic raster Moving Box Insertion confidence check even in cases where the input video image is static or lost.

  • Page 104: Wings Insertion

    BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) • Moving Box Attributes Controls Provides independent controls for setting the color and opacity of the moving-box insertion. • Color drop-down sets box color from multiple choices shown.
  • Page 105 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) Displays wings timing status (on both Wings tab and Card Status • Wings Status Displays displays) as described below. Note: • Wings timing is a function of the wings frame sync card/ device.
  • Page 106 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) Displays keyer timing status (on both Keyer tab and Status displays) as • Key/Fill Status Displays described below. Note: • Key/fill timing is a function of the respective key and fill signal frame sync card/device(s).
  • Page 107 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Alpha Threshold keying allows cost-effective luminance keying from low-cost generic file-based graphic sources. With the graphic source applied to both the Key and Fill inputs, the Key Alpha and Key Threshold controls can be set to easily optimize the key/fill as shown below.
  • Page 108 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Provides controls for VANC/HANC ancillary data de-embedding and embedding to and from program video stream. Data can be extracted and inserted within the device, bypassing the scaler (Bridge mode), or inserted and/or extracted to and from external interfaces via serial or IP interfaces.

  • Page 109: Comm Ports Setup Controls

    Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued COM Port Setup sub-tab provides insertion/extraction controls, and comm rules and status displays where serial comm is used for insertion and/or extraction. • Note: COM 1 and COM 2 are independently available for ANC Tx/Rx and have identical controls.
  • Page 110 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) • Extraction Flow Control Allows communication between device transmit and receiving destinations to regulate data receive as follows: • No Flow Control: Data is transmitted without buffering or checking to see if data is being transmitted faster than it can be received.
  • Page 111 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) Notes: • Packets received must be sized to fit in a native ancillary data packet (i.e., payloads that span multiple ancillary packets need to be broken down by the sending controller before they are sent to the device).
  • Page 112 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Data-Over-Audio sub-tab provides controls that allow SMPTE 337/338/339 non-PCM data to be embedded and de-embedded on embedded audio pairs, offering a very convenient self-contained transport within the program stream physical media.
  • Page 113 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Provides controls for setting up the two COMM (serial) ports for LTC or ANC functions, and setting comm protocol for each port. COMM Ports Setup Controls Note: This tab has identical independent controls for COM 1 and COM 2.
  • Page 114 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) • Insertion Sync Byte Control Allows use of a sync byte from device receiver back to sending source to synchronize communication between device receive and sending source as follows: •...

  • Page 115: Presets

    Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Allows user control settings to be saved in a Preset and then loaded (recalled) as desired, and provides a one-button restore of factory default settings.
  • Page 116 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) • Preset Save/Load Controls • Select Preset: drop-down allows a preset saved above to be selected to be loaded or deleted (in this example, custom preset “IRD Rcv122”).

  • Page 117: Gpo Setup Controls

    Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) Download (save) presets to a Upload (open) presets from a network network computer by clicking computer by clicking Upload Download Presets – Save at the at the bottom of bottom of the Presets page.
  • Page 118 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Provides event-based loading allowing a defined action to be automatically engaged upon various received signal status. Actions can be “canned” control commands or user-defined by going to a user preset.
  • Page 119 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) In the example here for Event 1, the Video Quality Events tab is set to screen for frozen video on Input A. When detected, this status can be used here (Video Quality set to “Input A Event Engaged”...
  • Page 120 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) User States is a special column which allows a logic state to be set (similar to a register or latch) whenever a defined condition is first triggered. A user state (which is latched until cleared by some other definable action) can be sucessively used with other user states, thereby allowing a final action to be invoked only when subordinate user states have been sequentially satisfied as true.
  • Page 121 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Provides three general-purpose timers that can be triggered to start, pause, reset, or stop upon event actions. The state of each timer, in turn, can also be used to invoke other actions.

  • Page 122: Admin

    (Thermal shutdown is enabled by default). CAUTION Admin The BBG-1002-UDX-DSP FPGA is designed for a normal-range operating temperature around 85° C core temperature. Operation in severe conditions exceeding this limit for non-sustained usage are within device operating safe parameters, and can be allowed by setting this control to Disable.

  • Page 123: User Log

    Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) Firmware upgrade controls allow a selected firmware version (where • Firmware Upgrade Controls multiple versions can be uploaded to the device’s internal memory) to invoke an upgrade to a selected version either instantly, or set to install on the next device reboot (thereby allowing device upgrade downtime to be controlled at a scheduled point in time).

  • Page 124: Alarms Setup Controls

    BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued Provides controls for setting up controls which screen for and propagate input program video alarms for video, audio, and ancillary data defect conditions. Conditions and alarm status can be propagated as Alarms Setup Controls DashBoard tree-view frame alarms, downloadable .txt...
  • Page 125 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) Ancillary Data Alarm Setup sub-tab allows setting up screening engagement and disengagement holdoff for absence of closed captioning packets. Note: • Video screened is the device SDI that is selected for the program video/audio path.
  • Page 126 BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) Audio sub-tabs independently show for all 16 embedded channels (per path) any missing audio (whether absent due to low level, mute or unlocked status). Note: • Audio screened is the audio associated with the selected SDI program inputs.
  • Page 127 Setup/Operating Instructions BBG-1002-UDX-DSP Function Menu List and Descriptions Table 3-2 BBG-1002-UDX-DSP Function Menu List — continued (continued) Alarm Event History shows the eight most-recent alarm events that have been detected (with most-recent at top of list). The alarm severity (as set using the Severity drop-down for each alarm type) sets the “LED” color shown here.

  • Page 128: Uploading Firmware Using Web Interface And Gui

    Uploading Firmware Using Web Interface and GUI Firmware (such as upgrades, option keys, and presets .bin files) can be uploaded to BBG-1002-UDX-DSP directly via the web html5 interface without going through DashBoard (see Figure 3-8). In addition to allowing uploads without needing a DashBoard connection, this method transfers files typically much faster than using DashBoard.

  • Page 129: Front Panel User Menus

    The front panel menus offers a true standalone means to configure the BBG-1002-UDX-DSP with no connection to a network required, and is useful where changes need to be done immediately (or in emergency situations) without the benefit of network access.
  • Page 130 Illuminates GREEN indicating signal presence for currently-selected input video path. Illuminates ORANGE if input video is lost. REF STATUS Illuminates GREEN indicating BBG-1002-UDX-DSP is receiving valid reference when set up for framesync operation. Illuminates ORANGE if reference is lost or incompatible with input video. COMM LED Illuminates GREEN when device is communicating with network connection.

  • Page 131: Basic Troubleshooting Checks

    Basic Troubleshooting Checks Item Checks Verify power presence and • On the BBG-1002-UDX-DSP, in all cases when power is being properly characteristics supplied all indicators should be illuminated. Any device showing no illuminated indicators should be cause for concern. • Check the Power Consumed indication for the BBG-1002-UDX-DSP. This can be observed using the Status front-panel or web UI pane.
  • Page 132 Corrective Action BBG-1002 shows Unlocked No video input present Make certain intended video source is message in connected to appropriate BBG-1002-UDX-DSP BBG-1002-UDX-DSP Info pane. video input. Make certain BNC cable connections are OK. Ancillary data (closed captioning, • Control(s) not enabled •...

  • Page 133: In Case Of Problems

    December 2015, your SD may not contain the recov- ery files. Contact Product Support to obtain the updated SD card containing both TTS library and SD recovery files. • If unit is a BBG-1000 Series device, remove the top cover before proceeding. 3-99 BBG-1002-UDX-DSP-OM (V1.4) BBG-1002-UDX-DSP PRODUCT MANUAL...
  • Page 134 • When reprogram is complete, LED turns off, on, and then off • again (entire process takes about 1-1/2 minute). Remove power from the card (remove card from slot or power-down BBG-1000 Series unit). 3-100 BBG-1002-UDX-DSP PRODUCT MANUAL BBG-1002-UDX-DSP-OM (V1.4)
  • Page 135 The Cobalt Digital Inc. Technical Support Department will continue to provide advice on any product manufactured by Cobalt Digital Inc., beyond the warranty period without charge, for the life of the product. See Contact Cobalt Digital Inc. (p. 1-24) in Chapter 1, “Introduction“ for contact information. 3-101 BBG-1002-UDX-DSP-OM (V1.4)
  • Page 136 This page intentionally blank 3-102 BBG-1002-UDX-DSP PRODUCT MANUAL BBG-1002-UDX-DSP-OM (V1.4)
  • Page 138 Cobalt Digital Inc. 2506 Galen Drive Champaign, IL 61821 Voice 217.344.1243 • Fax 217.344.1245 www.cobaltdigital.com BBG-1002-UDX-DSP-OM (V1.4) Printed in USA...

This manual is also suitable for:

Bbg-1000 seriesBbg-1002-udx-dsp-bBbg-1002-udx-dsp-cBbg-1002-udx-dsp-d-dinBbg-1002-d-hdbnc

Table of Contents