Cobalt Digital Inc BBG-1090-DEC-MPEG Product Manual page 38

The parameters are:
• Decoded Program, Available Programs: These two parameters work together, and are
used to select the program to be decoded in an MPTS. The program can be specified by
number in the Decoded Program field, or selected in the Available Programs drop-
down menu. If Program Auto-Select is checked, and a non-existing program number is
entered in the Decoded Program field, the decoder will ignore the setting and stay on the
current program.
• Available Programs: This control is pre-populated with a drop-down list of the
programs available in the transport stream. If the program name can be determined, it
will be shown, with the program number in parenthesis. If not, the program is shown as
Program X, where X is the actual program number. In the example below, Program 1
has a name (NBC), so it shown as "(1) NBC", and Program 2 does not have a name, so it
is shown as Program 2.
• Program Auto-Select: If checked, if the decoder does not find the configured program,
it will automatically play the first program in the MPTS. Otherwise, it will not play any
6
programs .
• Audio 1 Service: If the program has multiple audio services, the decoded one can be
selected here. The selection is a drop-down menu with the audio PID values. If a
language descriptor can be found for the audio service, the language code is displayed
here as well. It is also possible to disable audio decoding altogether, by selecting the
Disabled option. An example with three audio services (English, Portuguese and French)
is shown below.
6
In the current firmware version, this control is not available and is always checked.
38