Table of Contents
Advertisement
Noraxon U.S.A., Inc.
Step 2
Device Communication (Driver) Software Installation
No driver installation is needed. The myoMOTION Data Logger uses a G2 driver for
communication over the USB port.
Companion Software Installation
The myoMOTION System is compatible with the Noraxon MR3 software program. To install MR3
follow the appropriate instructions given below:
MR3 Installation
1. Insert the MR3 Software CD into the PC
2. A menu will automatically pop up
3. Click on "Install MR3" and follow the Wizard's instructions
4. A new icon will appear on your desktop.
the MR3 software.
Software Configuration
To analyze the myoMOTION Data Logger data, the data must first be imported into the database.
To do this, connect the myoMOTION Data Logger to the PC via USB cable. Open the MR3
software and click on the Database tab.
Open the Project and Subject the data will be imported into. Then, under the "Import" options,
select the "Import record from MyoMotion DataLogger (*.mml) and find the directory to the Data
Logger.
P-6828 Rev A (Oct 2014)
When ready to import the MyoMOTION Data
Logger records into the MR3 software, insert the
mating (smaller) end of the USB cable (CBL17)
into the USB connector on the side of the
receiver.
Insert the opposite end of the USB cable into an
available USB port on the computer.
Double click on the icon to start
myoMOTION Data Logger
13
Advertisement
Table of Contents
