Storage And Protecting Between Usages - Noraxon myoMOTION 682 User Manual

Noraxon U.S.A., Inc.
Storage and Protecting Between Usages
For extended storage or when travelling:

Put the myoMOTION sensors into shutdown mode *

Place all sensors into the sensor charging station

Turn Data Logger off

Position all components inside the system travelling case according to their prepared
cavities
* A special setting in the companion user software activates sensor shutdown mode. (See section
6) To access the shutdown mode in MR3:

Click on the Home Button in the top navigation bar

Click on the Setup Button in the upper right corner of the screen

Click on the Configure Device Button at bottom right corner of the Hardware Setup box

Click on the Shutdown Sensors Button at bottom of the Settings box.
When the sensors are shutdown they will stop blinking completely. The sensors are reactivated
by briefly charging them.
P-6828 Rev A (Oct 2014)
myoMOTION Data Logger
17