Noraxon U.S.A., Inc.
1D Data Logger (Back)
2 MyoMOTION Sensor (front)
Component Interconnections
Step 1a
Step 1b
P-6828 Rev A (Oct 2014)
1 Belt Clip – Used to secure the belt receiver
to the user or the wall mount provided with
the Data Logger
2 Serial Number – Unique 4 character serial
number used to identify each data logger
1 Serial Number – Unique 4 character serial
number which identifies each sensor.
2 Axis Indicator – Indicates the orientation of
the myoMOTION sensor.
3 Status – Sensor operational indicator
flashes green. Flash rate is faster when
measuring, slower when idle.
4 Charge – Indicator illuminates steady
amber while sensor is charging. When the
battery is fully charged the indication is off.
For charging the data logger insert the mating
(smaller) end of the USB cable (CBL17) into the
USB connector on the side of the receiver.
Insert the opposite end of the USB cable into the
USB port of the wall adapter power supply.
For charging the Data Logger, insert the mating
(smaller) end of the USB cable (CBL17) into the
USB connector on the side of the receiver.
Insert the opposite end of the USB cable into an
available USB port on the computer.
myoMOTION Data Logger
12