Component Inputs, Outputs And Indicators - Noraxon myoMOTION 682 User Manual

Noraxon U.S.A., Inc.
Component Inputs, Outputs and Indicators
1A Data Logger (Front)
1B Data Logger (Side)
1C Data Logger (Top)
P-6828 Rev A (Oct 2014)
1 Marker Button – When pressed, this button
creates a marker in the record that can later
be used in the analysis
2 LED Display – Guides the user through the
setup and indicates the status of the data
logger i.e. USB Ready, Measuring, etc.
3 Charge Indicator –Illuminates when the
Data Logger is charging
4 Keypad – Used to navigate device setup
and begin measurements
1. Power Switch – Toggles to turn the Data
Logger OFF or ON
2. Sync Out – TTL (on‐off) compatible 3.5 mm
stereo jack connection to other Noraxon
devices used to send a sync pulse to other
devices
3. Sync In – TTL (on‐off) compatible 3.5 mm
stereo jack connection to other Noraxon
devices used to accept a sync pulse
generated by other devices
4. USB Port – Mini B style USB connection
1 Marker Button – When pressed, this button
creates a marker in the record that can later
be used in the analysis
2 Light Indicator – Illuminates at every
second of the calibration countdown
myoMOTION Data Logger
11