Table of Contents
Advertisement
MyoMOTION Data Logger User Manual
Device Communication (Driver) Software Installation
No driver installation is needed. The MyoSync uses the standard Windows HID driver for
communication over the USB port.
Companion Software Installation
The MyoSync is compatible with Noaxon's MR3 software. Identify the companion software that
accompanied the equipment (MR3) and follow the appropriate instructions given next.
MR3 Installation
1. Insert the MR3 USB card into the PC
2. A menu will automatically pop up
3. Click on "Install MR3" and follow the Wizard's instructions
Companion Software Configuration
Before the MyoSync system can be used, the companion software must be configured to
recognize the different components that make up the system. Refer to the following configuration
instructions for the MR3 software.
MR3 Configuration
P-2628 Rev B
Step 1
Open the MR3 program and click on
the Setup button.
Step 2
Make sure the MyoSync is attached
to the USB port of the computer.
Click on the Insert Device button
7
Advertisement
Table of Contents
