Section 6: Preparing The Product For Use (Setup Instructions); Unpacking And Component Identification; Component Inputs, Outputs And Indicators - Noraxon MyoSync 262 User Manual

MyoMOTION Data Logger User Manual
Section 6: Preparing the Product for Use Section 6: Preparing the Product for Use Section 6: Preparing the Product for Use Section 6: Preparing the Product for Use
(Set- - - - up Instructions) (Set up Instructions)
(Set (Set up Instructions) up Instructions)

Unpacking and Component Identification

MyoSync User Manual (part #262C) This document
If additional accessories have been included please see Section 9, Accessories for component
identification.

Component Inputs, Outputs and Indicators

1A MyoSync (top)
P-2628 Rev B
MyoSync (part #262)
A to B USB Cable (part #CBL2)
Additional contents not illustrated
1 Wireless Port – To plug in wireless sync
transmitter module
2 Not Ready Indicator– Illuminated when
device is not set up appropriately
3 External Sync Indicator – Illuminates
when there is an external sync source
plugged in
4 Sync Source – Illuminates to indicate the
sync signal is generated by the computer
(PC) or an external source (EXT)
5 Sync Out Port – Ports to plug in sync
cables so the MyoSync can transmit a sync
signal to other devices
6 Sync Out Inverted – Port to plug in sync
cable to transmit an inverted sync signal to
another device
5