To Stop Playback; To Pause Playback; Fast Forward/Fast Reverse - Pioneer CDJ-1000MK3 Operating Instructions Manual

Hide thumbs Also See for CDJ-1000MK3:
Table of Contents

Advertisement

To stop playback

1. Press the EJECT button (0) when the EJECT UNLOCK/
LOCK switch is set to [UNLOCK].
When the EJECT UNLOCK/LOCK switch is set to [LOCK],
press the PLAY/PAUSE button (6) during playback, or
when a Cue point has been set, press the CUE button
(back cue) before pressing the EJECT button (0) to eject
the disc.
¶ Playback will stop and the disc will be ejected.
¶ Note that the CDJ-1000MK3 does not come with a stop button.
Resume function
¶ When the EJECT UNLOCK/LOCK switch is in the [UNLOCK] posi-
tion, even if the EJECT button is pressed by mistake, if the PLAY/
PAUSE button is pressed quickly (before the [EJECT] indicator lights
in the display), the unit will revert to the status it was in before the
EJECT button was pressed. However, the audio output will stop dur-
ing that time.
¶ Following disc eject, if the same disc is reinserted, the unit will return
to the same status it was in before the disc was ejected (with excep-
tion of loop).
¶ Following disc eject, if the FOLDER SEARCH button (|, \) or TRACK
SEARCH button (4, ¢) is pressed, the resume function will be
canceled.

To pause playback

During playback, press the PLAY/PAUSE button (6).
¶ The outer rings of the PLAY/PAUSE button and CUE button will flash,
and playback will be interrupted.
¶ If the PLAY/PAUSE button is pressed again, the button's outer ring
will light and playback will resume.
¶ In CDJ mode, broken playback sound will be output even during pause.
If you wish for no sound to be output, lower the output level of the
audio mixer.
¶ In VINYL mode, setting the VINYL SPEED ADJUST TOUCH/BRAKE
dial modifies the speed of deceleration until playback reaches full
pause. Rotating the dial clockwise causes the disc to decelerate slowly
before the pause.
¶ In VINYL mode, setting the VINYL SPEED ADJUST RELEASE/
START dial modifies the speed at which the disc accelerates when
pause is released until reaching full playback speed. Rotating the dial
clockwise causes the disc to accelerate more slowly to full speed.
¶ After setting the unit to pause, if no subsequent operation is per-
formed for 100 minutes, the disc rotation will automatically stop. In
this event, pressing the PLAY/PAUSE button will cause playback to
resume.

Fast forward/Fast reverse

Press one of the SEARCH buttons (1, ¡) during playback.
Press and hold the ¡ button for fast forward the disc; press and hold
the 1 button for fast reverse.
¶ When playing MP3, fast forward/fast reverse are supported only for
tracks inside the same folder.
¶ When playing MP3, fast forward/fast reverse times may be slower
depending on the track.
7 Super-fast search
Rotate the jog dial while pressing one of the SEARCH but-
tons (1, ¡).
¶ Hold down one of the SEARCH buttons (1, ¡) while turning the
jog dial in the desired direction to enter super-fast forward or super-
fast reverse mode.
¶ The speed of the search operation varies in response to the speed at
which the jog dial is turned.
¶ During super-fast search, the search direction is determined by the
direction the jog dial is turned. The direction of the pressed SEARCH
button (1, ¡) is ignored.
¶ When the jog dial rotation stops, the unit returns to playback mode.
¶ When the SEARCH button (1, ¡) is released, super-fast search is
canceled.
¶ When playing MP3, fast forward/fast reverse is supported only tracks
inside the same folder.
¶ When playing MP3, fast forward/fast reverse times may be slower
depending on the track.
DJ Player Operation/Operación del reproductor para DJ
Before Operating (Names and Functions of Parts)
Before Operating (Names and Functions of Parts)
Función de reanudación
¶ Cuando el interruptor EJECT UNLOCK/LOCK está en la posición [UN-
LOCK], aunque se presione por error el botón EJECT, si se presiona
rápidamente el botón PLAY/PAUSE (antes de que se encienda el
indicador [EJECT] en el visualizador), la unidad volverá al estado en el
que estaba antes de presionarse el botón EJECT. No obstante, la
salida de audio se detendrá durante este proceso.
¶ Después de la expulsión del disco, si se vuelve a insertar el mismo
disco, la unidad volverá al mismo estado en el que estaba antes de
expulsar el disco (con la excepción de bucles).
¶ Después de la expulsión del disco, si se presiona el botón FOLDER
SEARCH (|, \) o TRACK SEARCH (4, ¢), se cancelará la función
de reanudación.
Para pausar la reproducción
Durante la reproducción, presione el botón PLAY/PAUSE
(6).
¶ Los aros exteriores del botón PLAY/PAUSE y del botón CUE
parpadearán, y la reproducción se interrumpirá.
¶ Si se presiona el botón PLAY/PAUSE, el aro exterior del botón se
encenderá y se reanudará la reproducción.
¶ En el modo CDJ, saldrá sonido distorsionado de reproducción incluso
durante la pausa. Si no desea que salga sonido, reduzca el nivel de
salida de la consola de mezcla de audio.
¶ En el modo VINYL, el ajuste del mando VINYL SPEED ADJUST
TOUCH/BRAKE modifica la velocidad de desaceleración hasta que
la reproducción llega a la pausa completa. Al girar el mando hacia la
derecha, el disco se desacelera lentamente antes de establecerse la
pausa.
¶ En el modo VINYL, el ajuste del mando VINYL SPEED ADJUST RE-
LEASE/START modifica la velocidad de aceleración del disco cuando
se libera la pausa hasta que llega a la velocidad tope de reproducción.
Al girar el mando hacia la derecha, el disco se acelera con más lentitud
antes de llegar a la velocidad tope.
¶ Después de establecer la unidad en el modo de pausa, si no se efectúa
ninguna otra operación durante 100 minutos, la rotación del disco se
detendrá automáticamente. En este caso, presione el botón PLAY/
PAUSE para reanudar la reproducción.
Avance rápido/inversión rápida
Presione uno de los botones SEARCH (1, ¡) durante la
reproducción.
Presione y mantenga presionado el botón ¡ para realizar el avance
rápido en el disco; presione y mantenga presionado el botón 1 para
realizar la inversión rápida.
¶ Durante la reproducción de archivos MP3, el avance rápido/inversión
rápida sólo pueden realizarse para las pistas de dentro de la misma
carpeta.
¶ Durante la reproducción de archivos MP3, los tiempos del avance
rápido/inversión rápida pueden ser más lentos dependiendo de la pista.
7 Búsqueda súper rápida
Gire el mando de lanzadera mientras presiona uno de los
botones SEARCH (1, ¡).
¶ Mantenga presionado uno de los botones SEARCH (1, ¡) mientras
gira el mando de lanzadera en la dirección deseada para establecer el
modo de avance súper rápido o de inversión súper rápida.
¶ La velocidad de la operación de búsqueda varía en respuesta a la
velocidad a la que se gira el mando de lanzadera.
¶ Durante la búsqueda súper rápida, la dirección de búsqueda se
determina por la dirección en la que se gira el mando de lanzadera. Se
ignora la dirección del botón SEARCH (1, ¡) presionado.
¶ Cuando se deja de girar el mando de lanzadera, el aparato retorna al
modo de reproducción.
¶ Cuando se suelta el botón SEARCH (1, ¡), se cancela la búsqueda
súper rápida.
¶ Durante la reproducción de archivos MP3, el avance rápido/inversión
rápida sólo pueden realizarse para las pistas de dentro de la misma
carpeta.
¶ Durante la reproducción de archivos MP3, los tiempos del avance
rápido/inversión rápida pueden ser más lentos dependiendo de la pista.
23
<DRB1398> En/Sp

Advertisement

Table of Contents
loading

Table of Contents