Operations; Auto Cue Function; Starting Playback; Resume Function - Pioneer CDJ-200 Operating Instructions Manual

Compact disc player
Hide thumbs Also See for CDJ-200:
Table of Contents

Advertisement

OPERATIONS

PLAY/PAUSE
Jog dial

Auto Cue Function

When a disc is loaded or track search is performed, this function auto-
matically sets the cue point ( P.13) right before the track is actually
played.
¶ To turn ON/OFF
The Auto Cue function can be turned ON/OFF by pressing the
AUTO CUE button. The Auto Cue is turned on when the Auto Cue
indicator [A.CUE] appears in the display.
¶ The ON/OFF status of the Auto Cue function is stored in
memory when the power is turned off.
¶ Auto Cue level is fixed to –60 dB.

Starting Playback

1. Insert disc in the player.
¶ When inserting a disc, keep the label-side up, and insert only
one disc into the disc loading slot located in the front panel of
the unit. ( P.10)
¶ If a CD-ROM with no MP3 file in the first session is inserted, the
display will read [NO TRACK] and the CD-ROM will not be
played.
2. When Auto Cue function is ON, press the PLAY/PAUSE
button (6).
¶ Wait for the display's time display to appear before pressing the
button. The non-recorded portion at the beginning of the dis-
played track will be skipped and playback will begin instantly.
When the first track's playback ends, the player will automati-
cally search for the beginning of the next track. The indicator
on the CUE button will light, the PLAY/PAUSE button (6) in-
dicator will flash and the player will then wait for the PLAY/
PAUSE button (6) to be pressed before beginning playback
of the next track.
When the Auto Cue function is turned off, playback will
begin automatically from the first track.
¶ When Auto Cue function is turned off, playback will continue
after the first track has been played, with all subsequent tracks
being played in sequence.

Resume Function

When the same disc is inserted after being ejected once, the disc will
EJECT
be restarted from the place immediately before the disc was ejected.
However, the Digital Jog Break function will not be restored. If de-
sired, the TRACK SEARCH button can be pressed before playback
begins to perform normal track search and playback.
AUTO CUE

To Stop Playback

1. Press the EJECT button (0).
¶ Playback will stop and the disc will be ejected.
¶ The CDJ-200 is not provided with a conventional stop button.
¶ In the event the EJECT button (0) is pressed accidentally, im-
mediately (before [EJECT] is displayed in the display) press the
PLAY/PAUSE button (6) to cancel the eject command; play-
back will then restart from the place immediately before the
EJECT button (0) was pressed (during this time, sound output
will be temporarily interrupted).

To Temporarily Interrupt Playback

Press the PLAY/PAUSE button (6) during playback.
¶ The PLAY/PAUSE button (6) indicator and the CUE button indi-
cator will flash and playback will be paused.
¶ When the PLAY/PAUSE button (6) is pressed again, the indica-
tor on the button will light and the playback will continue.
¶ Broken sound will still be audible during the pause mode; to stop
all sound, lower the output sound volume of the audio mixer.
¶ If there has not been any operation for more than 100 minutes in
the pause mode, the disc rotation will automatically be stopped.
By pressing the PLAY/PAUSE button (6), the playback will be
resumed from the first track.

Jog Dial Functions

[Pitch Bend]
Rotate dial during play.
¶ The track will accelerate (FWD+ =Clockwise)/slowdown (REV–
=Counter-Clockwise) according to the amount and direction
the jog dial is turned. The rate of change is up to ±20 % (essen-
tially linear change).
¶ When jog dial rotatation stops, the speed returns to the speed
before the jog dial was first rotated.
¶ Pitch Bend is disabled when the Digital Jog Break function is
turned ON.
[Frame Search]
Rotate dial during pause.
¶ Moves audible pause position in frame units.
¶ Searches frames in the play direction when rotated clockwise,
and the reverse direction when rotated counter-clockwise.
¶ 48 frames are searched in one full cycle of the jog dial.
[Cue point adjust]
P.13 "Changing the cue point"
[Super-Fast Search]
P.12 "Super-Fast search"
[Super-Fast track search]
P.12 "Super-Fast track search"
[Super-Fast folder search]
P.12 "Super-Fast folder search"
[Digital Jog Break]
P.13 "Digital Jog Break"
OPERATIONS
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents