To Select Playback Of Tracks In A Specific Order; Inputting The Playback Program; About The Pause Program Function; To Stop Programmed Playback - Pioneer PD-7500 Operating Instructions Manual

TO SELECT PLAYBACK OF TRACKS IN A SPECIFIC ORDER
2 inputting the playback program |
®@ Can be used during normal play, program play, or stop mode.
1. Press PGM button @.
2. Use the number buttons to select the numbers of
the desired tracks, in the order you want playback
to proceed.
® Up te 24 tracks (steps) can be programmed.
3. When PLAY button @ is pressed, the selected
tracks wili be played back in the order in which
they were input.
NOTE:
® Pressing PGM button @: during normal playback and entering
2 program will automatically start the program after the currently-
playing track ends. Also, if PLAY button @ is pressed during
playback, the program will start immediately.
2 2 = @ £ach time a selection is programmed, the display will show the
oat — = ec programmed number and the total playback time. When the to-
ca =— Za = = tal playback time exceeds 100 minutes or when any part of the
Coo 0 ooo 30th and subsequent selections on a disc is programmed, the
— display will not show the total playing time.
oI 2 pare
<r . {
4 About the pause program function |
ua reas —
co
1s) When programming tracks, PAUSE button @ can be programmed
if desired in place of « disc track. When PAUSE button 49 is done,
"PA" will be displayed in place of a track number.
How to use the pause program function:
When recording both sides of a ette tape, program PAUSE but-
ton 48 at the end of the last 1 » be recorded on side A of the
tape; in this way, playback. will be automatically interrupted, thus
allowing you to turn the cassette tape over before resuming
recording.
NOTE:
@ A pause cannot be programmed as the first step (01) of a pro-
gram, nor can it be ;: nuned twice in succession.
@ Ifa pause is programn ve fast step of a program, the player
will not enter the f: e mode,
To stop programmed playback
@ Press STOP button 4; The programmed piayback will be ter-
minated, but the programmed tracks will remain stored in
memory (preserve program function).
® If PGM button @ is pressed during programmed play, the
programmed play will be terminated and normal playback will
commence. In this case as well, the programmed contents will
remain stored in memory (preserve program function).
13
<PRB1127>
my