Sleep Operation; Saving Energy During Sleep - Vivax ACP-09CH25AEMI User Manual

VIVAX
ENG

Sleep Operation

The SLEEP function is used to decrease energy use while you sleep (and
don't need the same temperature settings to stay comfortable). This
function can only be activated via remote control.
Press the SLEEP button when you are ready to go to sleep. When in COOL
mode, the unit will increase the temperature by 1°C (2°F) after 1 hour,
and will increase an additional 1°C (2°F) after another hour. When in
HEAT mode, the unit will decrease the temperature by 1°C (2°F) after 1
hour, and will decrease an additional 1°C (2°F) after another hour.
It will hold the new temperature for 5 hours, then the unit will turn off
automatically.
Note: The SLEEP function is not available in FAN or DRY mode.
Set
7 hours timer
Temperature
OFF

Saving energy during sleep