Replacing Fuse; Replacing Light Bulb - Kubota B26TL Operator's Manual

BReplacing Fuse
The tractor electrical system is protected from potential
damage by fuses.
A blown fuse indicates that there is an overload or short
somewhere in the electrical system.
If any of the fuses should blow, replace with a new one of
the same capacity.
A Before replacing a blown fuse, determine why the fuse
blew and make any necessary repairs. Failure to
follow this procedure may result in serious damage to
the tractor electrical
"TROUBLESHOOTING" section of this manual or your
local KUBOTA Dealer for specific information dealing
with electrical problems.
system. Refer to the
PERIODIC SERVICE OF THE TRACTOR
C Protected circuit
FUSE CAPACITY
No. (A)
(1) 5
(2) 10
(3) 20
(4) 20
(5) 30
(6) 25
(7) 25
(8) Slow blow fuse
BReplacing Light Bulb
1. Head lights.
Take the bulb out of the light body and replace with a
new one.
2. Other lights
Detach the lens and replace the bulb.
Light
Head lights / Work light
Tail light
Turn signal / Hazard light
Instrument panel light
Hazard light switch indicator
Work light (if equipped)
Protected circuit
OPC
Head light
instrument cluster
Auxiliary
Flasher / Hazard
Key stop
Front work light
Rear work light
Check circuit against wrong
battery connection
Capacity
35W
8W
23W
1.7W
0.6W
55W
75