Kubota B26TL Operator's Manual page 36

14 OPERATING THE ENGINE
4. Place the position control lever in
"LOWEST" position.
(1) Position control lever
5. Set the throttle lever to about 1/2 way.
(1) Hand throttle lever
(A) "DOWN"
"INCREASE"
"DECREASE"
6. Insert the key into the key switch and
turn it "ON".
C Check Easy Checker(TM) lamps:
1. When the key is turned "ON", lamps (2) (3) should
come on. If trouble should occur at any location while
the engine is running, the warning lamp corresponding
to that location comes on.
(1) Key switch
"OFF"
"ON"
"PREHEAT"
"START"