Table of Contents
Advertisement
Chapter 4
Chapter 4
Chapter 4
4.1.4.5 Changing frequency reference
4.1.4.5
Changing frequency reference
Changing frequency reference
Changing frequency reference
①
① Press the
the RIGHT ( ) key
parameter setting screen, press the SEL (O) key, the
setting screen, press the SEL (O) key, the
setting screen, press the SEL (O) key, the
setting screen, press the SEL (O) key, the
setting screen, press the SEL (O) key, the
parameter section of the parameter setting screen will
parameter section of the parameter setting screen will
parameter section of the parameter setting screen will
parameter section of the parameter setting screen will
parameter section of the parameter setting screen will
blink.
STOP
STOP
Output frequency
Output frequency
Output frequency
FA-01
01
Set S
Speed-M (Keypad
Keypad)
Back
oFW
②
② With UP/DOWN/LEFT/RIGHT
With UP/DOWN/LEFT/RIGHT(
With UP/DOWN/LEFT/RIGHT
the code to [
to [FA-01], then
then [Main speed reference
(keypad)] shall be
] shall be displayed, the frequency setting can
displayed, the frequency setting can
displayed, the frequency setting can
displayed, the frequency setting can
be chosen.
⇒Go to ③
③
If the displayed screen is different, change the
If the displayed screen is different, change the
If the displayed screen is different, change the
If the displayed screen is different, change the
frequency reference
frequency reference
frequency reference source
source. ⇒Go to ⑤
③ Press the
③
the SEL(O) key, with UP/DOWN/LEFT/RIGHT
key, with UP/DOWN/LEFT/RIGHT
key, with UP/DOWN/LEFT/RIGHT
key, with UP/DOWN/LEFT/RIGHT
(
(
) keys change
keys change the
STOP
STOP
Output frequency
Output frequency
Output frequency
FA-01
01
Set S
Speed-M (Keypad
Keypad)
Back
oFW
④
④ To save the changes press
To save the changes press
To save the changes press the SEL (O)
that in the position (F) should be displayed the
in the position (F) should be displayed the set
in the position (F) should be displayed the
in the position (F) should be displayed the
frequency. Press the
frequency. Press the F1 key, and will go to Home screen
F1 key, and will go to Home screen
F1 key, and will go to Home screen.
F1 key, and will go to Home screen
⇒Go to
[4.1.4.3
4.1.4.3]
key and after moving to the
after moving to the
after moving to the
M1
H03
0.00 Hz
0.00 Hz
0.00
Option
) keys change
change
[Main speed reference
⑤
frequency value
value.
M1
H03
0.00 Hz
46.4
46.49Hz
0.00
-
(F)↑
SEL (O) key, and after
after
For parameter configuration
For parameter configuration
For parameter configuration
For parameter configuration
⑤
With UP/DOWN/LEFT/RIGHT
ith UP/DOWN/LEFT/RIGHT
ith UP/DOWN/LEFT/RIGHT (
the function code
the function code to [AA101
the function code
STOP
Output frequency
Output frequency
AA101
Main speed source_M1
Main speed
01:Analogue input[Ai1]
01:Analogue input[Ai1]
01:Analogue input[Ai1]
Back
oFW
⑥
Press the SEL
SEL(O) key and with UP/DOWN
select the frequency reference
select the frequency reference
select the frequency reference
select the frequency reference source to be used.
[07:Keypad] is selected in this case
[0
] is selected in this case
] is selected in this case.
STOP
Output frequency
Output frequency
07:Keypad
Keypad
Keypad
08:RS485
:RS485
09:Option
:Option-1
10:Option
:Option-2
Back
oFW
⑦
To save changes
changes press the
the position (E)
the position (E), FW or RV should be displayed. Press
the position (E)
FW or RV should be displayed. Press
FW or RV should be displayed. Press
the F1 key, and will go to Home screen.
the
F1 key, and will go to Home screen.
F1 key, and will go to Home screen.
⇒Go to
⇒
[4.1.4.2
4.1.4.2]
4-6
) keys change
1].
M1
H03
0.00 Hz
0.00 Hz
_M1
0.00
Option
Option
key and with UP/DOWN(
key and with UP/DOWN
to be used.
M1
H03
0.00 Hz
0.00 Hz
]
0.00
Option
Option
the SEL (O) key, and then in
key, and then in
change
) keys,
keys,
Advertisement
Table of Contents
