Table of Contents
Advertisement
Chapter 4
Chapter 4
Chapter 4
4.1.3.1. Parameter setting screen
4.1.3.1
Parameter setting screen
Parameter setting screen
Parameter setting screen
Change the parameter.
Ch
parameter.
RUN
RUN
FW
FW
Output frequency
Output frequency
Output frequency
FA-01
01
Set Speed-M (Keypad
Set Speed
Keypad)
Menu
oFW
Press the SEL (O) key.
Press the SEL (O) key.
An area in the screen will be
An area in the screen will be
An area in the screen will be highlighted.
RUN
RUN
FW
FW
Output frequency
Output frequency
Output frequency
FA-01
01
Set Speed
peed-M (Keypad
Menu
oFW
With UP/DOWN (
ith UP/DOWN (
) keys
monitor area then will be highlighted
monitor area then will be
monitor area then will be
If SEL (O) key is pressed, the parameter code can be
If SEL (O) key is pressed, the parameter code can be
If SEL (O) key is pressed, the parameter code can be
If SEL (O) key is pressed, the parameter code can be
If SEL (O) key is pressed, the parameter code can be
changed.
RUN
RUN
FW
FW
Output frequency
Output frequency
Output frequency
FA-01
01
Set Speed
peed-M (Keypad
Back
oFW
Using UP/DOWN/LEFT/RIGHT (
Using
UP/DOWN/LEFT/RIGHT (
UP/DOWN/LEFT/RIGHT (
code to be monitored can be changed, pressing again the
code to be monitored can be changed, pressing again the
code to be monitored can be changed, pressing again the
code to be monitored can be changed, pressing again the
code to be monitored can be changed, pressing again the
code to be monitored can be changed, pressing again the
SEL (O) key give access to the function parameter. Press
SEL (O) key give access to the function parameter.
SEL (O) key give access to the function parameter.
SEL (O) key give access to the function parameter.
SEL (O) key give access to the function parameter.
key to return back
key
to return back.
M1
H03
29.51 Hz
29.51 Hz
29.51 Hz
29.51 Hz
29.51
Option
highlighted.
M1
H03
29.51 Hz
Keypad)
29.5
1 Hz
29.51
Option
keys select either parameter or
select either parameter or
select either parameter or
ed.
M1
H03
29.51 Hz
29.51 Hz
Keypad)
29.5
1 Hz
29.51
Option
) keys the function
) keys the function
) keys the function
Press 1
For parameter configuration
For parameter configuration
For parameter configuration
For parameter configuration
・In the case of a numerical value:
In the case of a numerical value:
In the case of a numerical value:
In the case of a numerical value:
RUN
FW
Output frequency
Output frequency
FA-01
Set Speed
peed-M (keypad
Back
oFW
With UP/DOWN/LEFT/RIGHT (
UP/DOWN/LEFT/RIGHT (
UP/DOWN/LEFT/RIGHT (
change the parameter
parameters value,
And then press the SEL (O) key to save the changes.
And then press the SEL (O) key to save the changes.
And then press the SEL (O) key to save the changes.
And then press the SEL (O) key to save the changes.
・In the case of
In the case of a selection menu
a selection menu
a selection menu:
The upper area of the display shows the
The upper area of the display shows the
The upper area of the display shows the selected
The upper area of the display shows the
function description
description.
RUN
FW
AA111
RUN command selection_M1
RUN command selection_M1
RUN command selection_M1
00:[FW]/[RV] terminal
:[FW]/[RV] terminal
01:3-wire
wire
02:Keypad
Keypad's RUN key
03:RS485
:RS485
Back
oFW
With UP/DOWN (
UP/DOWN (
the available choices.
the available choices.
And then press the SEL (O) key to save the changes.
And then press the SEL (O) key to save the changes.
And then press the SEL (O) key to save the changes.
And then press the SEL (O) key to save the changes.
4-3
M1
H03
29.51 Hz
29.51 Hz
keypad)
39.51 Hz
9.51 Hz
29.51
----
) keys
) keys
s value,
M1
H03
29.51
----
) keys
) keys you can move between
you can move between
Advertisement
Table of Contents
