Table of Contents
Advertisement
APWeb – Initial Setup by Network Admin
Setting a Static IP Address
The current (default) IP address is displayed on the APWeb Configuration page under the section for
Current APWeb Settings. A field is provided on the same page under Configure APWeb Settings for
entering a static IP address.
APWeb Configuration page
FIG. 35
Note: The APWeb Configuration page also includes fields for additional settings and bootup
operation options (see page 75).
To enter a static IP address:
1.
From any page in the site, click the Configuration link.
2.
Under Configure APWeb Settings, enter the static IP address in the IP Address field.
3.
Click Apply; click OK when prompted to reboot.
Important: Any time you select "Reboot" as an option from the APWeb Configuration page or
from any dialog box opened from the APWeb site, the APWeb server reboots. The reboot
updates information between the Octaire and the APWeb server. The Octaire system itself
does not reboot.
Using a DHCP IP Address (Optional)
The APWeb server offers the option of using a DHCP (Dynamic Host Configuration Protocol)
IP address. The settings on the APWeb Configuration page will typically be for a fixed or static
IP address.
To force invocation of a DHCP IP address:
1.
From any page in the site, click the Configuration link.
2.
Under Configure APWeb Settings, enter 0.0.0.0 in the IP Address field.
3.
Click Apply.
4.
Click OK when prompted to reboot.
The APWeb server begins searching for a DHCP server.
If the search times out, the address will revert to the default APWeb IP address (192.168.0.251).
70
Current APWeb Settings
Reboot APWeb
Configure APWeb Settings
Set APWeb Site Name
Scroll for additional options
Octaire Instruction Manual
Advertisement
Table of Contents
