Reading The Lcd Routing Configuration; Turning The Unit On And Off; Making Av Routing Or "Ties" From The Front Panel - Hall Research Technologies HSM-88-4K User Manual

Dd
All the front panel buttons have back light LEDs with three states to help the
operation. With just a little practice, one can easily learn to monitor and control the
matrix.

3.2.3 Reading the LCD routing configuration

Easy to understand routing information is displayed on the LCD. The inputs are
variable, but the outputs are static and never change.
In the above example, the routing configuration can be understood from the output
end as follows:

Output 1 is tied to Input 1

Output 2 is tied to input 1 and so on ...
The same configuration can be analyzed from the input end as follows:

Input 1 is tied to both Output 1 and 2

Input 2 is tied to both Output 3 and 4 and so on...

3.2.4 Turning the unit on and off

Press the power button any time to turn ON the matrix. To turn the unit OFF, hold
the power button for 3 seconds.

3.2.5 Making AV Routing or "Ties" from the Front Panel

Routing is possible from both the input and output end. It is easier to route from
the output.
LED Status Indicator
© Copyright 2017 Hall Research, Inc.
4K 8X8 HDMI Matrix Switcher
7