Dd
Example: Route Input 1 to Output 1, 2 and 3
3.2.8 Blanking from Output end
1. To blank an output, hold the Output for 3 seconds or until its led starts
blinking. Selecting a new output will exit the "Blanking Mode". Note that
multiple outputs cannot be blanked at the same time.
2. Press SET to apply the changes. The blanked Output will be crossed on the
LCD, indicating that it is blanked.
Example: Blanking output 1
3.2.9 Blanking from Input end
1. To blank an Input, hold the input for 3 seconds. Note that if the input is
tied to all the multiple outputs, all tied outputs will be blanked.
2. Press SET to apply the changes. All the affected output ports and blanked
input will be crossed on the LCD display.
Example: Blanking output 1
4K 8X8 HDMI Matrix Switcher
© Copyright 2017 Hall Research, Inc.
9