Dd
Command
IP<cr>
MAC<cr>
IP
xxx.xxx.xxx.xxx<cr>
DHCPn <cr>
n=0 or 1
DHCP<cr>
HSM<cr>
8.0 Recalling Factory Defaults
Factory defaults resets all parameters (including network settings) back to
default.
Select the FACTORY RESET option on "Setup" tab on the Windows GUI.
Control command FD<CR> resets all the configuration back to factory
default setting.
NOTE
Factory resetting the HSM-88-4K will restore back the default Hall
Research settings to the device. The user must confirm the action and take
all necessary precautions to prevent loss of data.
Description
IP Configuration
Read the IP address
Read the MAC
Address
Assign the static IP
Set DHCP ON or OFF
Query the status of
DHCP
System Status
Get the system status
© Copyright 2017 Hall Research, Inc.
4K 8X8 HDMI Matrix Switcher
Response
IP
xxx.xxx.xxx.xxx<cr>
MAC
xx.xx.xx.xx.xx.xx.xx<c
r>
IP
xxx.xxx.xxx.xxx<cr>
DHCPn<cr>
DHCPn <cr>
n=0 or 1
FW<cr>
PW<cr>
CV<cr>
LK <cr>
BP<cr>
IP<cr>
MAC<cr>
DHCP<cr>
19