Mx-B382 Initial Setup - Sharp MX-B382 Technical Handy Manual

MX-B382 INITIAL SETUP

DEVELOPER SET-UP
Sim 25-02
Toner Installation must be performed after Auto Developer Adjustment is completed.
** For optimum image quality & performance, it is recommended to setup & install
developer at the customer site.
Clean LSU Dust Proof Glass.
TONER INSTALLATION & REPLENISHMENT
Install K Toner Cartridge.
PRODUCT ACTIVATION & FIRMWARE UPGRADE
Activation of Optional Product(s):-
Sim 22-05
INITIAL SETUP
Sim 26-06
Sim 26-35
Sim 26-52
Sim 55-03
Sim 55-03
System Settings: Adjust Date/Time (Inc. Daylight Saving setting).
Keyboard Language Setting (For Embedded Keyboard):-
System Settings – Default Settings – Keyboard Select: Set English(US)
Set cassette size by adjusting the guides in the cassette.
Paper Size & Type
Set Active USB Port (MFP PWB DIP):-
PRINT ENGINE IMAGE SKEW
Sim 64-02
8
Auto Developer Adjustment - Select K.
Check Firmware version(s):-
Machine Destination.
Set Multi Error Counter:-
Non Printed Paper Counter Set-up.
Process Mixed Size Pages (orientation) when Printing in Duplex:-
SSW 3-6, 0 = Disable, 1 = Enable.
Toner Remaining Display: SSW 22-5,
Setting:- System Settings – Paper Tray Settings
Image Writing (Skew) Adjustment:-
Select A=1, B=1, C=254, D=255
System Settings – Product Key.
Upgrade to latest version.
Set to 1 (Multi Count).
0 = Disable, 1 = Enable.
SW2 OFF (Front - Default), ON (Rear)
SHARP