SHARP
The following pages contain information regarding test simulations. For a detailed description for each
test simulation, please refer to the MX-B382 or MX-B382P Service Manual.
MX-B382:-
Entry Code:
MX-B382P:-
Entry Code:
Key Function List [MX-B382P]:
Up
&
Down
selection) and switch to the previous
Left
&
Also used to select a numeral value,*
Right
To enter a Simulation Code:
Use the Entry Code sequence as described above.
Press the
key to change from MAIN mode to 10KEY mode.
Using the SCROLL key
Example: To enter Sim 49:-
Scroll to 4 and select OK
Then scroll to 9 and select OK.
To fix the simulation number, press the shortcut key
Used to shift the menu to the one-
step upper stage menu in the
simulation mode.
Used to scroll upward. (Item
selection)
Used to switch to the next screen.
Used to scroll downward (Item
screen.
Used to select an item or a button
on the Simulation menu in the
"MAIN" mode.
key, # key, or C key on the
Simulation screen in the "10KEY"
mode.
, select the required number and press the OK.
TEST SIMULATION
Used to fix the selected button,
to enter a numeral, * key, # key,
or C key, and to execute the
simulation operation.
Used to enter the simulation
mode and switch between the
"10KEY" mode (value input) and
the "MAIN" mode (item
selection).
Used to enter the simulation
mode, and to cancel the
simulation mode.
Used to enter the simulation
mode.
Used to fix the simulation
number, adjustment values, or
set values after entering them
33